Grade

Type of questions

English Senior High

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

Waiting for Answers Answers: 0
Certification Undergraduate

簿記の仕分け問題です 全くわからず、 5問あるので回答と解説をお願いします。

第1問 下記の各取引について仕訳しなさい。 ただし、 勘定科目は、 次の中から最も適当と思われるものを選ぶこと。 現 金当 座 預 金別段預 金買 掛 金受取手形 新株式申込証拠金 資 本 金繰越利益剰余金 資本準備金 その他資本剰余金 未 収金 未 払 金支払利息受取利 息備 車 品 両備品減価償却累計額 車両減価償却累計額減価償却費固定資産売却益 固定資産売却損 支払手数料受取手数料前 払 利 息未払利息 前受利息 未 収 利 息 有価証券利息繰 越 商 品未払法人税等 仮払法人税等研究開発費法人税等 1. 当期首に営業用の乗用車を ¥2,500,000 翌月末払いの条件で購入し、 従来使用していた乗用車 (取得原価 ¥2,000,000、 減価償却累計額 ¥1,800,000、 間接法で記帳) については、 ¥300,000 で下取りされることとなっ た。この下取価格は新車代金の支払額から差し引くこととされた。 2. 決算にあたり、 当期の法人税 ¥2,500,000 住民税 ¥500,000、 事業税 ¥700,000 を見積もった。 なお、中間申 告の際に、 前年度の納付税額の合計 ¥3,100,000 の50%を現金で納付していた。 3. 当月の研究開発部門の人件費 ¥200,000 と研究開発用の材料の購入代金 ¥250,000 を小切手を振り出して支払 った。また、研究開発目的のみに使用する実験装置 ¥500,000 を購入し、 その支払いは翌月末払いとした。 4. 決算の1か月前に満期の到来した約束手形 ¥3,000,000 について、 満期日の直前に手形の更改 (満期日を3か月 延長)の申し出があり、 延長3か月分の利息 ¥120,000 を含めた新たな約束手形を受け取っていたが、 未処理で あることが決算時に判明した。 なお、あわせて利息に関する決算整理仕訳も行った。 5. 新株 10,000 株の募集を行い、1株につき ¥2,500 で発行することとし、 申込期日までにその全額が申込証拠金 として別段預金に払い込まれていたが、 申込期日が到来したため、 その払込額を資本金に振り替え、別段預金は 当座預金へと振り替えた。 資本金への振替えは、 会社法で認められている最低額を計上することとした。

Waiting for Answers Answers: 0
Japanese history Senior High

この資料を現代語訳して欲しいです!!

問4 下線部①に関連して,次の史料に関して述べた後の文あいについて,その 正誤の組合せとして正しいものを,後の①~④のうちから一つ選べ。 23 史料 かねひろ 御合体の事 連々 (注1) 兼黒卿 (注2) を以て申し合せ候処, 入眼(注3)の条珍 重に候。三種神器帰座あるべきの上は、御譲国の儀 (注4) たるべきの旨. 其の 意を得候(注5)。自今以後,両朝の御流相代々御譲位治定(注6) せしめ候ひ畢ん なかんずく ことごと おわ ぬ。就中諸国国衙,悉く皆御計ひたるべく候(注7)。 長講堂 (注8) に於いては, 諸国分一円持明院殿(注9)の御進止 (注10) たるべく候。 此等の趣を以て, 吉田右 府禅門相共に執奏あるべく候。御入洛の次第等,なお兼熙卿に申し含め候,其 意を得べく候か。 恐々謹言 十一月十三日 (注11) 阿野前内大臣殿(注12) (注1) 連々: 念を入れて。 (注3)入眼:完成したこと。 (注5) 其の意を得候:了解する。 義満 (「近衛家文書」) (注2) 兼熙卿: 吉田兼熙。 (注4) 御譲国の儀 : 譲位の儀式 (注6) 治定:落着する。 (注7) 国,悉く皆御計ひたるべく候:国衙領は大覚寺統の管轄とする。 (注8) 長講堂 : 長講堂領。 (注10) 御進止: 支配 (注9) 持明院殿: 後小松天皇 (注11) 十一月十三日: 実際は1392年の10月13日 (注12) 阿野前内大臣殿:阿野実為。後亀山天皇の信任を得て内大臣となった。

Unresolved Answers: 1
Chemistry Senior High

[至急]大門4の(1)(2)教えてほしいです!

つくったとき、こ モル濃度 2 液 次の問いに答えよ。 20 15 (1) グルコース C6H12O6 90gを水に溶かして, 250mLの水溶液をつくった。 この溶液のモル濃度は何mol/Lか。 (2) 酢酸 CH3COOH 30gを水に溶かして, 200mLの水溶液をつくった。 こ の溶液のモル濃度は何mol/L か。 (3) 0.10mol/Lの水酸化ナトリウム NaOH水溶液 200mLには,何molの NaOH が溶けているか (4) 食酢は0.70mol/Lの酢酸 CH3COOH水溶液である。 食酢 100mL中に は何gの CH3COOH が含まれるか。 3 濃度の換算: 質量パーセント濃度からモル濃度 市販のアンモニア水 (質量パーセント濃度 28%, 密度 0.90g/cm²)について 次の問いに答えよ。 (3) (1)このアンモニア水100gに含まれるアンモニア NH3 の物質量は何molか。 (2)このアンモニア水 100gの体積は何Lか。 (3)このアンモニア水のモル濃度は何mol/L か。 濃度の換算: モル濃度から質量パーセント濃度 溶液のモル 0.80mol/Lの硫酸H2SO4 (密度1.05g/cm²)について,次の問いに答えよ。 (1)この硫酸1000mL に含まれる H2SO4の質量は何gか。 (2)この硫酸の質量パーセント濃度は何%か。 (1) 溶質の物 溶液の (2) (3) (4) 密度 (1) (3) HCNO Na Mg ASiS CIK Ca Fe Cu Zn Ag I Pb 1.0 12 14 16 23 24 128 32 35.5 39 40 56 63.5 65 108 127 207

Unresolved Answers: 0
Political economics Senior High

2015年に派遣期間を最長3年にするとあるのに、労働契約法のとこで5年を超えた場合はとあるのはなぜですか? 教えてください!!お願いします🙇

派遣労働の始まり 1985年 3 2004年5派 派遣 「法の制定…4系問的な業種にのみ派遣労働が認められる。 (通訳・秘書など 13 業種 当時の派遣期間は原則1年) (90年代の不況に対応するため規制緩和が進 遣業種の自由化 危険 23 専門 ※これまでは「製造業」における派遣は認められていなかった。 ※しかし、失業や6ケーキングプア の増加を招く危険性 非正規雇用の増加 (パート 契約社員 派遣社員など) . 働く貧者(フルタイム……も (教科書 P1574) 2015年 派遣期間の制限を最長 年にする。 同一人物を正社員の代わりとして長期間働かせないために上限を設けた。 同一人物を雇い続けるならば、 正社員や無期雇用にするべき! ※さらに3年に達した派遣社員に対しては雇用安定措置を義務づける。 ◆雇用安定措置とは? ①派遣先企業に直接雇用を依頼する。 ②新たな派遣先を紹介する。 社 派遣会社の義務 ③派遣会社が「無期雇用」する。 常に給料が発生するため、 収入が安定する 労働契約 法における雇用安定措置 今の形のま 有期労働契約が5年を超えた場合は「無期雇用」 契約に切り替えができる!(希望制) ※ 「正社員」になるわけではないので注意

Waiting for Answers Answers: 0
Physics Senior High

高校物理です。 大門10の(5)の解き方がわかりません。 至急おしえてください! 答えは6.9×10^-6らしいです。

3/3 !! (各2点×4=8点) (1)抵抗を流れる In(t) をを含む式で表わせ。 (2) コイルを流れる電流()をを含む式で表わせ。 IR IL Ic Vo R (3) コンデンサーを流れる電流 Ic(t)をを含む式で表わせ。 R L (4)電源を流れる電流を、I(t) = Asin(wt) + Bcom (wt) と表す とき、 A. B に相当する式を求めよ。 10 真空中を考え、図のように3本の平行で十分に長い直線状の導線 A,B,Cを一辺dの正三角 形の頂点に垂直に置く。 導線ABに紙面の表から裏向きに、導線には逆向きに、それ ぞれ、 Is. Is. Ic の電流を流す必要があれば真空の透磁率 μg を用いて、 次の問いに答え よ。 ただし、向きを答える場合は、図に示した16方位の方角で答えること。 (各2点×6=12点) (1) Aが導線Cの位置につくる磁界の強さを求 めよ。 (2) B C の位置につくる磁界の強さを求 めよ。 Olc 以下の間では Po= 4 × 10-7 [N/A2 d=1.0×10-1 [m] In = In = Ic = 2.0 [A] として考えよ。 (3) Aと Bが導線Cの位置につくる磁界の 強さは、 何 [A/m] か。 (4) 前間における磁界の向きを答えよ。 (5) か Cの長さ 5.0×10-1 [m] あたりの部分が受け る力の大きさは何 (6) 前間における力の向きを答えよ。 d 西山西 d B d 北北西 北北東 南南西 (-) Cos I IA. 2πF 2nd 2 2×3.14×1.0×10 3.15 0314/10009 180 514 TLE

Waiting for Answers Answers: 0