Grade

Type of questions

IT Senior High

【情報】 文章を読み取る問題です。 ①が答えですが自分は⓪だと思いました。 ①と⓪の違いは点線の範囲ですが、点線のところってどこから読み取れますか?

問2 次のAさんと先生の会話文を読み、後の問い (a~c) に答えよ。 Aさん:コンピュータのオペレーティングシステムで,システムのパフォーマン スやリソース使用状況を監視する「モニタリングツール」の CPU の項 目に「キャッシュ」という用語があったのですが,これは何を表してい るのですか? 先生: CPUと主記憶装置との間にあるのがキャッシュメモリで,その容量を 「キャッシュ」という項目に書いてあるのです。CPUはコンピュータの動 作に必要なデータを主記憶装置とやり取りしながら処理しています。CPU と主記憶装置では,どちらのほうが高速に動作するかわかりますか? Aさん: 確か, 主記憶装置よりも CPU のほうが高速に動作するんですよね。 Aさん:つまり、CPUはまず1次キャッシュにデータを探しに行って, データが なければ2次キャッシュ, そこにもなければ3次キャッシュというよう にアクセスするということですね。 先生:そういうことです。CPUはキャッシュメモリのおかげで, 効率よく処理 することができるのですね。 a CPU レジスタ CPU Aさんと先生の会話文をふまえて, CPU, 主記憶装置, キャッシュメモリの 正しい構成として最も適当なものを、次の①~③のうちから一つ選べ。 I ② ③ CPU CPU レジスタ レジスタ レジスタ 1次キャッシュ 主記憶装置 2次キャッシュ 2次キャッシュ 1次キャッシュ 1次キャッシュ 3次キャッシュ Aさん: キャッシュメモリを CPU と主記憶装置との間に置くことによって、な ぜ待ち時間が軽減されるのですか? 主記憶装置 3次キャッシュ 主記憶装置 2次キャッシュ 2次キャッシュ 3次キャッシュ 3次キャッシュ 大 先生:そのとおりです。 CPU は非常に高速に動作しますが, 主記憶装置は低速 に動作するため待ち時間が発生してしまいます。 そこで, CPUと主記憶 装置との間にキャッシュメモリを置いて,この待ち時間を軽減している のです。 1次キャッシュ 主記憶装置 先生: キャッシュメモリは、データを一時的に保管しておくものです。 CPU が 頻繁に使用するデータを主記憶装置ではなくキャッシュメモリに一時的 に保管しておくことによって, CPU が主記憶装置にアクセスする回数を 軽減させています。 HOMAI Aさん: なるほど理解できました。 ただ、 モニタリングツールのCPUの項目 は、 右図のように 「1次キャッシュ」 「2次キャッシュ」, 「3次キャッシュ」 という名称になっているのですが、 これは複数のキャッシュメモリがあ るということなのでしょうか? 基本速度: 2.50GHz ソケット: 1 コア: 6 1次キャッシュ: 2次キャッシュ: 3次キャッシュ: b Aさんがモニタリングツールで1次キャッシュ,2次キャッシュ,3次キャッ シュの容量を調べたところ、 図1のとおりであった。 これらをキャッシュ全体 の容量に対する割合で表したときの正しい円グラフを,次の①~③のうちから 一つ選べ。なお, 円グラフでは, 1次キャッシュ, 2次キャッシュ, 3次キャッ シュをそれぞれ L1、L2, L3 と表記している。 480KB 7.5MB 12 O /L1 ① 18.0MB ② (3) L2, L3 L1 L3 L2 C L1 先生:基本的にキャッシュメモリはCPU 内部に複数設置されていて, レジス タ(記憶装置) から近い順に1次キャッシュ, 2次キャッシュ,3次キャッ シュと呼ばれています。レジスタに近いキャッシュメモリほど,一般的 に高速で容量が小さいという特徴があります。 -4- 図1 モニタリングツールの CPU の項目 K L2 M G T + L3 L2 480KB 0.48MB L3 L1 7.SMB 18MB -5-

Solved Answers: 1
Science Junior High

(3)(4)の解説の計算の仕方でなぜ答えが求めれるのかが分かりません。どうして求めれるのか教えて欲しいです。他に良い計算方法、考え方があればそれも教えて欲しいです。🙇‍♂️

ちょうさん 6Mさんは、物質が水にとけることについて興味をもち、実験を行った。 こ れについて、あとの各問いに答えなさい。 ただし、表は100gの水に硝酸カ リウム、ミョウバン、塩化ナトリウムがとける最大の質量と温度の関係を表 したものであり、図1は、この関係をグラフに表したものである。 表 水の温度(℃) 0 20 10 60 40 80 硝酸カリウム 【gl 13.3 22.0 31.6 63.9 109.2 168.8 ミョウバン(g) 塩化ナトリウム(g) 37.6 37.7 37.8 38.3 39.0 40.0 5.8 7.6 11.4 23.8 57.4/321.6 図1 120 100gの水にとける物質の質量 100 酸カリウム」 8 100 80 60 ミョウバン 40 20 塩化ナトリウム 20 40 60 80 100 温度(℃) 【実験】 図のように、40℃の水50.0gを入れた3つのピーカーに、それぞれ硝酸カリウム、ミョウバン、塩化 ナトリウムを15.0g入れてよく混ぜると、2つのビーカーはすべてとけたが、もう1つのビーカーはとけ残りが あった。とけ残りのなかった2つのピーカーの水溶液を10℃になるまでゆっくり冷やすと、一つのピーカーは物 質がすべてとけた水溶液のままだったが、もう一つのピーカーの水溶液からは固体が出てきた。 実験の下線部の水溶液で、10℃になったときに出 「てきた固体の質量は何gですか。 その値を求めなさ 図豆 硝酸カリウム 15.0g い。 ようせい (2)(1)の固体のように、 物質を溶媒にとかしてから温 12.40- 15 127 600 ミョウバン 15.0g 50 塩化ナトリウム 15.0g 度を下げるなどして固体をとり出す操作のことを何 といいますか。 その用語を答えなさい。 水一 水 水・ 50.0g 50.0g 50.0g (3) 実験で、40℃の水50.0gでとけ残りのあったビーカーに、 とけ残りがなくなるまで40℃の水を追加して加えま す。何gより多く水を加えればよいですか。 その値を、小数第1位を四捨五入して整数で求めなさい。 ほうわ (4)/80℃の塩化ナトリウムの飽和水溶液100.0gをつくります。このとき、塩化ナトリウム何gに水を加えて水溶 全体の質量が100gとなるように調整すればよいですか。 塩化ナトリウムの質量を、小数第2位を四捨五入し て小数第1位まで求めなさい。 100:40 80x

Waiting for Answers Answers: 0
Science Junior High

(3)、(4)の解き方を教えて下さい💦 こたえは(3)13 (4)28.6です!

しょうさん 6 Mさんは、物質が水にとけることについて興味をもち、実験を行った。こ れについて、あとの各問いに答えなさい。 ただし、表は100gの水に硝酸カ リウム、ミョウバン、塩化ナトリウムがとける最大の質量と温度の関係を表 したものであり、図 Iは、この関係をグラフに表したものである。 表 水の温度 [℃] 0 10 20 40 60 80 63.9 硝酸カリウム 〔g〕 ミョウバンク [g]' 塩化ナトリウム [g] 27.0 13.3 22.0 31.6 63.9 109.2168.8 57.4321.6 7.6 11.4 23.8 5.8 37.6 37.7 37.8 38.3 11.9 39.0 40.0 図100gの水にとける物質の質量 I 120 硝酸カリウム g 100 80 60 ミョウバン 40 20 塩化ナトリウム 0 0 20 40 60 80 100 温度 [℃] 【実験】 図IIのように、40℃の水50.0gを入れた3つのビーカーに、それぞれ硝酸カリウム、ミョウバン、塩化 ナトリウムを15.0g入れてよく混ぜると、2つのビーカーはすべてとけたが、もう1つのビーカーはとけ残りが あった。とけ残りのなかった2つのビーカーの水溶液を10℃になるまでゆっくり冷やすと、1つのビーカーは物 質がすべてとけた水溶液のままだったが、もう1つのビーカーの水溶液からは固体が出てきた。 た (1) 実験の下線部の水溶液で、 10℃になったときに出 てきた固体の質量は何gですか。 その値を求めなさ 図Ⅱ 硝酸カリウム ミョウバン 15.0g 15.0g い。 塩化ナトリウム 15.0g ようばい (2)(1)の固体のように、 物質を溶媒にとかしてから温 度を下げるなどして固体をとり出す操作のことを何 といいますか。 その用語を答えなさい。 水 水 水 50.0g 50.0g 50.0g (3)実験で、40℃の水50.0gでとけ残りのあったビーカーに、 とけ残りがなくなるまで40℃の水を追加して加えま す。何gより多く水を加えればよいですか。 その値を、小数第1位を四捨五入して整数で求めなさい。 63.9. ほうわ 63.9- 50 = x+50 13. ? 142 50+63.9 (4) 80℃の塩化ナトリウムの飽和水溶液100.0gをつくります。このとき、塩化ナトリウム何gに水を加えて水溶 液全体の質量が100gとなるように調整すればよいですか。 塩化ナトリウムの質量を、 小数第2位を四捨五入し て小数第1位まで求めなさい ~4 100gx 幼ナス900-40+x AMD ON MET

Waiting for Answers Answers: 0
English Senior High

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

Waiting for Answers Answers: 0