学年

質問の種類

理科 中学生

(1)を教えてください 答えはウです メモは気にしないでください🙇🏻‍♀️🙇🏻‍♀️

ウ イオンの 100円 エイオンの 6 酸・アルカリとイオンについて調べるため、次の実験1,2を行いました。 これに関して、あとの (1) (3)の問いに答えなさい。なお、実験1.2で用いたすべてのうすい水酸化ナトリウム水溶液の濃度は 等しく, すべてのうすい塩酸の濃度も等しいものとする。 実験 1 NaOH) 17.3 1100 (1) 実験1では, うすい水酸化ナトリウム水溶液にうすい塩酸を混ぜ合わせたことで, 中和の反応が起 こった。これについて、次の(a), (b)の問いに答えなさい。 試験管AEの水溶液中に含まれるイオンの総数を棒グラフで表すと、 どのようになるか。 次 のア~エのうちから最も適当なものを一つ選びなさい。 ①5本の試験管A~E を用意し、 図1のように. ある濃度のうすい水酸化ナトリウム水溶液を、そ れぞれの試験管に 4.0cmずつ入れた。 ② 試験管A~E に、 それぞれ異なる体積のうす い塩酸を加えて、それぞれの試験管の水溶液を赤 一色と青色のリトマス紙につけた。 表は、 その結果 をまとめたものである。 表で、 リトマス紙のよう すが 「○」であるものは色の変化があったことを、 「x」であるものは色の変化がなかったことを、そ うすい塩酸 A B C D E 46 すい水酸化ナトリウム水溶液 れぞれ表している。 表 01 強 +10) ( 試験管 AA B C D E 加えたうすい塩酸の体積(cm'] 2.0 4.0 6.0 8.0 10.0 赤色リトマス紙のようす ○ x × × 青色リトマス紙のようす × x × ○ 0 0 ABCDE ABCDE 0 0 ABCDE 試験管 試験管 ABCDE CART (b) 試験管Cの水溶液中に含まれているイオンをすべて、イオンを表す化学式で書きなさい。 Na CL 79.5(2) 次の文章は、実験2でろ紙にしみこませた硝酸カリウム水溶液について述べたものである。文章中 x y | にあてはまるものの組み合わせとして最も適当なものを、あとのアーエのうち から一つ選びなさい。 硝酸カリウム水溶液は中性の水溶液で、pHの値は (KNO3)は、水にとけるとイオンに分かれる 酸イオン (NO」)に電離する。 X である。 溶質である硝酸カリウム であり、水中でカリウムイオン(K*)と硝

回答募集中 回答数: 0
理科 中学生

【理科 中1 ものの溶け方】 2️⃣-6の問題について 食塩の結晶を完全に取り出せるわけではないから イになるのですか? 教えていただきたいです!

2 実験〔1〕 空のビーカーAに、水100.0gを入れてから、食塩36.0gを加えて、 60℃に保ってかき混ぜた。その結果、加えた食塩はすべてとけた。 〔2〕〔1〕でつくった水溶液を20℃まで冷やしたところ、途中で食塩の 結晶が水溶液中に出てきた。 〔3〕ろうとにつけたる紙を利用して、適切な操作で、[2]の水溶液から 食塩の結晶をとり出した。結晶以外の液は、ビーカーAとは 別のビーカーBに受けた。 〔4〕 結果の考察に用いるため、水の温度と、水100gにとける 食塩の限度の量の関係を調べて、表にまとめた。 36.0gが溶けて 表 水温(℃) 10 20 30 40 50 60 70 80 いるのだから、 下線部の量(g) 35.735.7 358 361 36.336,737137.5 38.0 36.0gが限度の温度 ▼ 20°C~30℃ 〒30℃~40℃ ウ40℃~50℃ エ50℃~60℃ (ア) 2 実験[2]で食塩の結晶が水溶液中に出てき始めたときの温度は? 6 実験[3]でビーカーBに受けた液の説明として、 最も適当なものは? T ア 水100.0gに食塩36.0gをとかした水溶液よりも食塩の濃度が高い イ 水100.0gに食塩36.0gをとかした水溶液よりも食塩の濃度が低い ウ食塩がとけていない、純粋な水 (イ) 45 イヌワラビに見られ、ゼニゴケに見られない特徴に

回答募集中 回答数: 0
理科 中学生

(2)と(3)ののさ答えの出し方がよくわかりません。教えてください。

右の図は、プレートのずれによって起こったある 地震のゆれを地点A〜Cに設置した地震計で記録し たもので、P波とS波によるゆれの始まった時刻と 震源からの距離の関係を表している。 これに関して、 次の(1)~(4)の問いに答えなさい。 ただし, P波とS 波が伝わる速さは,それぞれ一定であるものとする。 ① 次の文は,日本列島付近でのプレートの動き について述べたものである。文中のX Y 「命令」という語句を用いて。 簡潔に書きなさい。 図 ●はP波によるゆれの始まりを表す ○はS波によるゆれの始まりを表す 280 IP波 S波 C 240 震源からの距離 200 160 B 120 て、最も適当なものを,下のア~エから一つ選 び、その符号を書きなさい。 に当てはまる語句の組み合わせとし (km) H T4 A 80 40 0 7時 日本列島付近では、 X 7時 7時 7時 7時 7時 7時 18分 プレートの下に 18分 12118分 18分 19分 19分 19分 20秒 30秒 40秒 50秒 00秒 10秒 20秒 Y プレートが沈みこんでおり、変形に 時刻 25 たえきれなくなった X プレートの反発 80 120 により地震が起こることがある。 ア [X 大陸, Y 海洋】 ウ〔X 海洋, Y 大陸】 〔X大陸 Y 大陸】 [X海洋Y 海洋〕 (2) S波の伝わる速さは何km/sか, 求めなさい。 (3) 震源からの距離が152kmの地点Dでは,P波によるゆれの始まった時刻は7時何分何秒か、求めなさい。 +44 Ich

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
生物 大学生・専門学校生・社会人

教えていただきたいです!

【生物基礎 必答問題】 1 遺伝子とそのはたらきに関する次の文章 (II)を読み、 後の各問いに答えよ。 (配点 25) I 20世紀のはじめごろに遺伝子が染色体上に存在することが示唆されてから、 DNA とタ ンパク質のどちらが遺伝子の本体なのかが議論されていた。 ヌクレオチドを基本単位とす るDNAは2本のヌクレオチド鎖からなるア 構造をとる。 アミノ酸がつながった 分子であるタンパク質は, 種類ごとにさまざまな立体構造をつくる。 DNA を構成する 塩基の種類数よりも、タンパク質を構成するアミノ酸の種類数の方が多いため、当初は, 化学構造がより多様なタンパク質が遺伝子の本体であると考える研究者が多かった。 (a) 肺炎球菌 (肺炎双球菌)には、外側に炭水化物でできたさや (カプセル)をもち病原性のあ るS型と, さやをもたず病原性のないR型菌とがある(図1)。 S型菌がマウスの体内 に侵入すると,マウスは肺炎を発症して死亡するが, R型菌がマウスの体内に侵入しても、 免疫のはたらきにより肺炎を発症しないことが知られている。しかし,加熱殺菌したS 型菌と生きたR型菌を混合してマウスに注射したところ,マウスは肺炎を発症して死亡 し、マウスの体内から生きたS型菌が検出された。このような結果になった理由は加 熱殺菌したS型菌に含まれていたなんらかの物質が、生きたR型に取り込まれ, R型 菌がS型菌の形質をもつようになったためである。このような現象を形質転換という。

回答募集中 回答数: 0