学年

質問の種類

理科 中学生

(4)で問題の意味がよく分からなくて何を求めたらいいのか分からないので教えてください🙏

20mm 規 総仕上げ編 実験 無色透明の水溶液が30cmずつ入ったビー (H31 福島改) カーA~Dを用意した。A~Dの水溶液は,う すい塩酸 うすい水酸化ナトリウム水溶液, う すい硫酸, 砂糖水の4種類のいずれかである。 これらを区別するために、 次のⅠ~Ⅲを行った。 I 各ビーカーの水溶液を5cmずつそれぞれ 試験管にとり, マグネシウムリボンを入れる と,AとBの水溶液は気体が発生したが, C とDの水溶液は気体は発生しなかった。 Ⅱ 各ビーカーの水溶液を5cmずつそれぞれ 試験管にとり,塩化バリウム水溶液を加える と,Aの水溶液は沈殿が生じたが, B, C, Dの水溶液は沈殿は生じなかった。 水面からの深さ面 底面 の深 さと る。 本に こ の水 Ⅲ 図の装置で、各 ビーカーの水溶液 に電流が流れるか どうかを調べると, A, B, Cでは電 電源装置 + 電極- 水溶液 電流計 った。 70.0 [1.60] あの 流が流れたが, Dでは電流は流れなかった。 口(1) 実験のI で, A, B の水溶液から発生した気 体は同じ種類であった。 この気体の説明として 正しいものを, 次のア~エから1つ選びなさい。 ア 石灰水を白くにごらせる性質をもつ。 イ 空気中に体積の割合で約20%ふくまれる。 E.81 ウ刺激臭があり, 水に非常によくとける。 同じ温度では気体の中で最も密度が小さい。 □(2) 実験のⅡで, 水溶液Aにふくまれる, 沈殿の 元となった陰イオンは何か。 化学式で書きなさ くい。 D (3)ピーカーB,Cの水溶液はそれぞれ何か。 (4) 実験のⅠ Ⅱはそのままに、 実験のⅢのかわ りにピーカーA~Dの水溶液を区別することが できる操作を, 次のア~エから1つ選びなさい。 ア 水酸化バリウム水溶液を加える。 イ 塩化コバルト紙につける。 青色リトマス紙につける。 エフェノールフタレイン溶液を加える。 の 例 従 く カ 各7点 (1) (2) (3)B (3) C (4) 195

回答募集中 回答数: 0
理科 中学生

理科の中和の範囲です! この問題が分からないので教えてください🙇‍♂️

実験> 酸とアルカリの中和について調べるために, 次の①~③の手順で実験を行った。 図1のように、5個のビーカーA~Eを用意し,それぞれにうすい水酸化ナトリウム水溶液Xを 10.0cmずつ入れた。 これに, うすい塩酸YをAには2.0cm,Bには4.0cm,Cには6.0cm,Dには 8.0cm,Eには10.0cm加え,ガラス棒でよくかき混ぜた。 次に, ビーカーA~Eに緑色のBTB溶液 を1~2滴ずつ加えて、水溶液の色の変化を観察したところ, 表のような結果になった。 図 1 ガラス棒 うすい塩酸 2.0cm³ .Y .Y Y 24.0cm3 6.0cm3 8.0cm3 10.0cm3 うすい水酸化 X X X X ナトリウム水溶液X 10.0cm3 10.0cm3 10.0cm3 10.0cm3 10.0cm³ ビーカーA ビーカー B ビーカー C ビーカーD ビーカーE 表 ビーカー A B C D E うすい水酸化ナトリウム水溶液Xの体積 [cm] 10.0 10.0 10.0 10.0 10.0 うすい塩酸Yの体積 [cm² ] 2.0 4.0 6.0 8.0 10.0 BTB溶液を加えたときの色 青 青 青 ** ( ) ② ① で, BTB溶液を加えたあとの5個のビーカーに,マグ ネシウムリボンを入れ, 反応のようすを観察したところ,1 個のビーカーではさかんに気体が発生した。 図2 うすい塩酸Y ③ ①で用いたうすい水酸化ナトリウム水溶液 X10.0cmに水 10.0cmを加えて, うすい水酸化ナトリウム水溶液 Z20.0cm をつくった。 次に, ビーカーFを用意し、 図2のように, うすい水酸化 ナトリウム水溶液Zを10.0cmとり 緑色のBTB溶液を1~ 2滴加えた。 これに, ①で用いたうすい塩酸Yをこまごめピペットで少しずつ加えていき, 水溶液の色 うすい水酸化 ナトリウム水溶液Z 10.0cm³ + ビーカーF BTB溶液 の変化を観察した。

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
理科 中学生

なぜ答えがオになるんですか?

5 りょうたさんは、酸とアルカリの反応について調べる実験を行った。 また、塩化銅水溶液に 電流を流したときの変化について調べる実験も行った。 次のりょうたさんのノートについて、 あとの(1)~(5)の問いに答えなさい。 りょうたさんのノートの一部 実験 1 【課題】 酸とアルカリの反応について調べる 【方法】 BTB溶液を入れたうすい塩酸に十分な量のマグネシウムリボンを入れたところ、 水素 が発生した。 その後、 水酸化カルシウム水溶液を2cmずつ加えていった。 【結果】 水素の発生のようすや水溶液の色などを表1にまとめた。 表 1 水酸化カルシウム 水溶液を加えた体験 0cm² 2cm² 4cm² 6cm² 8cm² 水素の発生の ようす 勢いよく 発生した 発生が 弱まった 発生 しなかった 発生 しなかった 発生 しなかった 実験2 【課題】 水溶液の色 黄色 うすい黄色 緑色 うすい青色 青色 塩化銅水溶液に電流を流したときの変化を調べる。 【方法】 ● 塩化銅水溶液をビーカーに入れ、 炭素 電源装置 棒を電極として、 図のような装置を組み 立てる。 の板 ②電圧を加えて、 塩化銅水溶液に電流を 流し、図の電極C、Dで起こる変化を観 察する。 ・発泡ポリスチレン 豆電球 EHIC 電極D ~10%の塩化銅水溶液 図 【結果】 図の電極Cの表面では あ し、電極Dの表面では い した。

回答募集中 回答数: 0
理科 中学生

どなたか3番と4番の分かりやすい解説を教えて頂けませんか🙇🏻‍♀️՞

暖気 地表 前 2 主にうすい塩酸を入れ、マグネシウムを加えたところ た。気体の発生が完全に止まったあと、ビーカー全体の質量を測定した。マグネシウム を変え、同様の実験を行った。表は、その結果をまとめたものである。次の問いに答え 1 イヌワ アト 2 図2: 7.2 8.4 マグネシウム片の質量[g] 反応後のビーカー全体の質量[g] 4.8 3.6 93.3 94.4 6.0 9.6 ア 96.6 97.8 95.5 99.0 3 図 ア 1 イ Mg + ウ Mg + この実験で起きた反応の化学反応式はどれか。 ア Mg + HC1 →>> MgCl + H2 4 2HC1 → MgCl + H2 2HC1 → MgCl2 + H2 2 I 2Mg + 2HC1 -> MgCl2 + H₂ この実験で発生した気体について正しく述べている文はいくつあるか。 ①空気中で火をつけると燃えて水になる。 ②水に溶けやすく、石灰水を白くにごらせる。 ③ 空気より重く、下方置換法で気体を集める。 日 A 4. ロケットの燃料などにも利用される。 4 ⑤ ダイコンおろしにオキシドールを入れても同じ気体が発生する。 ア 1つ イ 2つ ウ 3つ エ 4つ マグネシウム片16g をすべて溶かすためには, 実験で使用したうすい塩酸は何g必要か。 ア 74g イ 79g ウ 84g I 89 g マグネシウム片 21.6g に, 実験で使用したうすい塩酸100gを加えると, 発生する気体の 量はどれか。 ア 1.5g イ 1.6g ウ 1.7g エ 1.8g

回答募集中 回答数: 0
数学 中学生

難しいかもしれませんが この問題の解き方を教えてください🙇🏻‍♀️

り 2 公 B,Cがあり,x座標はそれぞれ- 2, 1,3である。 直線ACとy軸との交点を点Dとし, 線分CD上に2点 C, D また、xの変域が−2≦x≦1のとき,yの変域は0≦x≦2で ある。 ......① 太郎さんと花子さんは次の問題について話している。 次の各問いに答えよ。 問題 2Ⅱ) 人外学高学賃 図のように、関数y=ax(aは定数)のグラフ上に3点A. D A €22 とは異なる点Pをとる。 四角形POBCの面積が3となるときの点Pの座標を求めよ。 -20 1 高 花子: 問題の下線部 ①から,点Aのy座標が分かるね。 太郎:そうだね。 点Aの座標が分かればα=アとなるよ。 次に,点Bと点C の座標も求めておこう。 うーん、四角形POBCの面積を直接求めるのは難しそうだなあ・・・ 花子:まず四角形DOBCの面積を求めてみるのはどうだろう。それなら,3点 A,B,Cの座標からAC/ OBとなるから、求めやすいんじゃないかな。 太郎:そうか! 四角形DOBCの面積はイだから,そこから四角形POBCの 面積が3となるような点Pの座標を見つければ良いね! (1) 会話文のア, イに入る数を答えよ。 (2)点Pの座標を求めよ。 (8-x) 自 80% SW 8 3 大小2つのさいころを投げたとき, 大きいさいころの出た目をα, 小さいさいころの出た bとし,直線y=x-bを考える。 この直線とx軸,y軸の交点をそれぞれA,Bとし,原点を0とするとき、次の確率を求めよ。 (1) 直線の傾きが1以下になる確率 (2) OABが直角二等辺三角形になる確率 (3)点Aのx座標が整数になる確率 DEAREA&&58=0A = 4 図のように, AB=AE=1, AD=2の直方体 ABCDEFGHがある。 点Pが対角線AG上を動く とき、次の問いに答えよ。 (1) AP:PG=3:1のとき, 四角すいP-EFGHの体積を求めよ。 (2) CPの長さが最小になるときのCPの長さを求めよ。 (3)点Pが平面 CHF 上にあるときのCPの長さを求めよ。 (途中経過を図や式で示すこと) H A IB E F

回答募集中 回答数: 0