学年

質問の種類

生物 高校生

生4-10 下の問題なのですが、計算部分がわかりません。100倍に希釈とか色々出てきてどれを結局使うのかがわからず悩んでます。 どなたかすみませんがよろしくお願いします🙇‍♀️

副交感神経は,神経細胞内に含まれている物質A を分泌することで、特定の器官に 作用することが知られている。カエルの副交感神経に含まれる物質Aと心臓の拍動の ~実験3を行った。 なお, 実験1~実験3で用いた生理的塩類溶液は,アサリの体液 関係を調べるため,物質Aに感度よく応答をするアサリの心臓を用いて、 次の実験1 と類似した塩類濃度の水溶液である。 実験1 物質Aを含まない生理的塩類溶液中でのアサリの心臓の拍動数は, 1分間 あたり25回であった。 実験2 カエルの心臓につながっている副交感神経1gを取り出し、 生理的塩類溶 液中ですりつぶし、ろ過して100mLの抽出液をつくった。さらに、この抽 出液を使って100倍の希釈液をつくり、その希釈液にアサリの心臓を浸した ところ, 拍動数は1分間あたり 25回であった。 実験3 カエルの心臓につながっている副交感神経 1g を取り出し, すぐに100℃ で1分間加熱した後に、実験2と同様の手順で希釈液をつくり、その希釈液 にアサリの心臓を浸したところ, 拍動数は1分間あたり15回であった。 問3 実験1~実験3の結果に関連して, カエルの副交感神経には,物質Aの分解 に関わる物質Xも存在することがわかった。 このことについて,次の(1)(2)に 答えよ。 2141717 (2)物質Aの濃度とアサリの心臓の拍動数の変化について調べるために、さまざ まな濃度の物質Aの生理的塩類溶液にアサリの心臓を浸して拍動数を測定した ところ、図2のグラフが得られた。 実験1~ 実験3の結果と図2のグラフから カエルの副交感神経 1gに含まれる物質Aの重さは何ngと考えられるか。 実 験2実験3が希釈液を用いていることを考慮し、最も適当な数値を、後の① ~⑥のうちから一つ選べ。なお、1ngは 1/17pg 109gに相当する。 10 ang 25 20 の 15 アサリの心臓の拍動数(回/分) 10 0 12 (1) 実験1~実験3の結果から導かれる, 物質Aと物質 Xの熱に対する応答に関 する考察として最も適当なものを,次の①~④のうちから一つ選べ。 9 ① 100℃の加熱で,物質 A, 物質 Xの作用はともに失われる。 ② 100℃の加熱で, 物質Aの作用は失われるが,物質Xの作用は失われない ③ 100℃の加熱で, 物質Aの作用は失われないが,物質Xの作用は失われる。 ④ 100℃の加熱で,物質 A, 物質 Xの作用はともに失われない。 103 102 102 10 物質 Aの濃度(ng/mL) (注) 横軸は対数目盛り 図2 112 103 20 5 10 1 10 © © 6 200

回答募集中 回答数: 0
生物 高校生

生3-18 3枚目が私が解いた方法で、オキアミ→カタクチイワシの転換効率が10%だから100%にするには10倍かける必要あるから0.01ppm✕10がカタクチイワシ。 カタクチイワシ→ブリは20%だから100%にするには5倍かけるので0.1✕ 5ppmより正解は0.5ppm... 続きを読む

XX B ヒトの活動は,生態系にさまざまな影響を及ぼしている。 かつて殺虫剤や農薬と して使用された DDT により, 食物連鎖の高次消費者が激減したことがあった。 こ れは、特定の物質が、周囲の環境に含まれるよりも高濃度で生物の体内に蓄積され 生物濃縮という現象による。 る (b) また、ヒトの活動によって意図的に,あるいは意図されずに本来の生息場所から 別の場所に移され, その場所にすみ着いている生物は (c)外来生物とよばれる。近年, こうした外来生物が生態系に及ぼす影響が大きくなっている。 問5 下線部(b) に関連して, 図2は, 海洋における食物連鎖の一例を示す。図中 の矢印の先に示す魚は捕食者で,数値は捕食者を成長させる被食者の重量の転 換効率(%)を示す。 例えば, 転換効率が50%のときは,捕食者1kgの成長の ために被食者を2kg 捕食することが必要であることを示す。図2中のオキアミ の DDT 体内濃度が0.01 ppm とすると, 予想されるブリのDDT 体内濃度とし て最も適当な数値を,後の①~⑥のうちから一つ選べ。 ただし,被食者の体内 に含まれていた DDT のすべては捕食者に移って体内にすべて蓄積され, 捕食 者における DDT の分解・排出はないものとする。 なお, ppm は重量の割合を 表しており,例えば, 1 ppm は,体重1kgあたり1mg の DDT が含まれてい ることを意味する。 18 ppm Okg いる 10% 7103 10 オキアミ カタクチイワシ 20 DDT 0.01 ppm 6.01kg ブリ 10kg 図 2 50 0.05 ② 0.1 ③ 0.25 ⑤ 1.0 ⑥ 2.0 + 0.5

回答募集中 回答数: 0
数学 高校生

かっこ2のアで1-tとtを解答と逆にしてもいいと思いやってたのですが答えが合わないので計算途中をお願いしたいですよ

する(s, t |基本例題 34 直線のベクトル方程式, 媒介変数表示 00000 (1) 3点A(a),B(b),C(c) を頂点とする △ABC がある。 辺AB を2:3に内 分する点を通り,辺 ACに平行な直線のベクトル方程式を求めよ。 指針 2点(3,2) (2,-4) を通る直線の方程式を媒介変数を用いて表せ。 (イ)(ア)で求めた直線の方程式を, tを消去した形で表せ。 (1)点A(a)を通り,方向ベクトルの直線のベクトル方程式は p=a+td 40 67 1 p.65 基本事項 1 章 ここでは,Mを定点, AC を方向ベクトルとみて、この式にあてはめる (結果はa, もこおよび媒介変数を含む式となる)。 (2)2点A(a),B(b) を通る直線のベクトル方程式は b=(1-t)a+tb D=(x,y), a= (-3, 2) = (2,-4) とみて,これを成分で表す。 (1)直線上の任意の点をP(D) とし, tを媒介変数とする。 3a+26 A(a) ⑤ ベクトル方程式 解答 M (m) とすると m= P(p) 5 2 辺 ACに平行な直線の方向ベクトルはACであるから b=m+tAC=30+26+t(ca) M(m) 3 c-a t=0 B(b) C(c) 5 t=19 整理して b = (1/2/3 - ta1+1/26+1ctは媒介変数) 3a+26 +t(c-a) 5 でもよい。 LS) (2)2点(-322-4 を通る直線上の任意の点 の座標 (x,y) とすると (x,y)=(1-t)(-3, 2)+t(2,-4) =(-3(1-t)+2t, 2(1-t)-4t) =(5t-3, -6t+2) P(x, y), A(-3, 2), B(2,-4) とすると, OP= (1-t)OA+tOB と同じこと (Oは原点)。 各成分を比較。 x=5t-3 よって (tは媒介変数) ② とする。x=31 ① ×6+② ×5 から 6x+5y+8=0 tを消去。 ly=-6t+2 (イ) x=5t-3. ①,y=-6t+2 参考 数学IIの問題として, (2) を解くと, 2点 (-3, 2) (2, -4) を通る直線の方程式! -4-2 2+3 y-2= (x+3) から 6x+5y+8=0 練習 (1) △ABCにおいて, A(a),B(b),C(c)とする。 M を辺BC の中点とする 34 直線AMのベクトル方程式を求めよ。 博介変数で表された式, tを消去

回答募集中 回答数: 0
物理 高校生

解説お願いします🙇‍♀️🙇‍♀️

次の文章中の空欄 ア ~ ウに入れる式の組合せとして最も適当なものを、下の ①~⑧のうちから一つ選べ。 11 電子が金属の結晶に外部から侵入する場合には, その表面において屈折が生じる。 以下では,電子 が真空中から金属結晶内部に侵入する際の屈折率 について考察する。 図のように, 質量m,電荷-e (e>0) の電子を電圧V で加速させ, 金属結晶に当 てる。装置は全て真空中にあるとし, 加速される 前の電子の速さを0とみなすと,m, e, Vo,およ び金属に侵入する直前の電子の速さ” の間には, 次の関係式が成り立つ。 10 真空 金曜 1 2 mv₁² = evo ア イ ウ よって, 加速された後の 電子(電子波)の真空中にお ける波長入 は, プランク 定数をんとして Vo+V e(Vo+V) √2meVo Vo 0 h Vo-v ② √2meV e(Vo+V) Vo =アと表される。 また, 金属結晶内部の電 Vo+V e(Vo-V) √2meV V₁ 位が外部に対しV (V > 0) だけ高い場合,金属に侵入 h Vo-V ④ 後の電子の速さを”とする と、12m2=イである。 √2meV e(Vo-V) V₁ ⑤ /2meVo Vo+V e(Vo+V) h √ Vo したがって, 金属結晶内 部での電子波の波長をと ⑥ /2meVo V₁-V e(Vo+V) h √ Vo したときに,229 で定 で定義され ⑦ √2meVo e(Vo-V) Vo+V h る屈折率は,Vo, および V V₁ を用いて,229 ⑧ /2meVo V₁-V = ウ と e(Vo-V) h V₁ 表される。

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0