学年

質問の種類

理科 中学生

問2と問4の計算の仕方を教えてください赤く書いてあるのが答えです🙇‍♀️

6 水溶液の性質に関する実験を行った。 図は物質A 図 と物質Bの溶解度曲線である。 あとの問いに答え なさい。(2021 富山) < 実験1> 250 ア 60℃の水 200gを入れたピーカーに物質Aを 300g加えてよくかき混ぜたところ, とけきれ ずに残った。 イ ビーカーの水溶液を加熱し, 温度を80℃まで 上げたところ、 すべてとけた。 の 200 と 150 100 50 G0 100gの水にとける物質の質量は 物質 A 物質 B. 0 20 30 40 60 水の温度(℃) 90 80 16 100 ウ さらに水溶液を加熱し、沸騰させ、水をいくらか蒸発させた。 水溶液の温度を30℃まで下げ,出てきた固体をろ過でとり出した。 〈実験2> オ新たに用意したピーカーに60℃の水 200gを入れ, 物質Bをとけるだけ加えて飽和水溶液をつくった。 カオの水溶液の温度を20℃まで下げると,物質Bの固体が少し出てきた。 問で温度を80℃まで上げた水溶液にはあと何gの物質Aをとかすことができるか、図を参考に求めなさい 問2 エにおいて、 ろ過でとり出した固体は228gだった。 ⑦で蒸発させた水は何gか,求めなさい。 ただし, 30℃における物質Aの溶解度は48gである。 -48 70 50 180 問3 土のように,一度とかした物質を再び固体としてとり出すことを何というか,書きなさい。 再結晶 問4 木の水溶液の質量パーセント濃度は何%だと考えられるか。 60℃における物質Bの溶解度を39gとして 小数第1位を四捨五入して整数で答えなさい。 28

回答募集中 回答数: 0
理科 中学生

(4)で、電熱線aと電熱線bを直列に繋いでいるから、抵抗が大きくなるのは分かるんですけど、二つの電熱線使ってるからその分発熱量も多くなるのに、答えがオになる理由がわかりません。

≪実験≫ 【方法】 ① 抵抗の大きさが異なる電熱線 a b 表1 を用意した。 表1は、これらの電熱線 における電圧と電力の関係についてま とめたものである。 ~電熱線 a 電熱線 b ②電熱線a を用いて、 図1のような装置を組 み立てた。 電源装置の電圧を4.0Vにして回 路に電流を流し、 1分ごとに5分間、水温を 測定した。 そして、 各時間の水温の測定値から、 水の上昇温度を求めた。 2 0 2238 4.0Vで 8.0Wの電力を消費する。 4.0Vで 4.0Wの電力を消費する。 1.0 電源装置 + 452 ※温度計、ガラス棒、 スタンドは省略してい る。 スイッチ ポリエチレン の容器 電圧計 お ③ 電熱線bを用いて、②と同様の操作を行っ た。ただし、ポリエチレンの容器に入れた み置きの水の質量と温度は、電熱線abを 用いたときとで等しくした。 くみ置き の水 ww 電熱線 a 図 1 【結果】 表2 電熱線を用いたときの電流を流した時間と水の上昇温度の関係 5 時間 [分] 0 1 2 3 4 5 水温 [℃] 20.0 20.8 21.6 22.4 23.2 24.0 92 3 上昇温度 0 0.8 1.6 [℃] 2.4 3.2 4.0 300 表3 電熱線b を用いたときの電流を流した時間と水の上昇温度の関係 時間 [分] 0 1 2 3 4 5 水温 [℃] 20.0 20.4 20.8 21.2 21.6 22.0 上昇温度 [℃] 0 0.4 0.8 1.2 1.6 2.0 4 1200

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
物理 高校生

気体が真空へ膨張するときなぜ仕事をしないとなるのでしょうか

図のように,栓Cが付いた細い管でつながれた二つの円筒容器 A, B がある。左の 容器 A の体積は Vo で, 右の容器 B には, なめらかに動く断面積Sのピストンが取り 付けられている。はじめ,栓Cは閉じられており,容器 A には絶対温度 To で外部と 同じ圧力 Poの気体が入っている。また, 容器Bの内部は真空であり, 体積が夢とな るようにピストンが固定されている。 ただし, 円筒容器,栓,ピストンは熱を通さ ず, 細い管の体積は無視してよいものとする。 O 0 ピストン製 S 容器 A 栓C 容器B (断面積) C Vo, To, Po Vo 1/2 真空 Poえなけれ 問1 ピストンの位置を保ったまま栓Cを開くと, 気体が容器 A, B 全体に一様に広 がった。この過程に関する記述として正しいものを二つ選べ。原千代千葉華 ① 気体は外部に対して仕事をせず, 気体の圧力は減少した。 間 Vq .> ② 気体は外部に対して仕事をせず, 気体の圧力は変化しない。 気体は外部に対して仕事をせず,気体の圧力は変化しない。標 ③ 気体は外部に対して仕事をし, 気体の圧力は減少した。 ④ 気体は外部に対して仕事をし, 気体の圧力は変化しない。 2 ⑤ 気体の温度は 1 To に下がる。 0EST @ ⑥ 気体の温度はTのまま変化しない。 3 2 ⑦ 気体の温度はTに上がる。 シリンダー ocea 083 Q 068 0

回答募集中 回答数: 0
理科 中学生

理科の水溶液の問題です。 3枚目の「水100gに換算すると〜」までは分かるのですが、換算しようとしてなぜその式になるのかが分かりません。教えてください。

R3B 水溶液の性質を調べるため, 3種類の白色の物質 a, b, c を用いて 〔実験1〕 から 〔実験3〕まで を行った。これらの実験で用いた物質 a,b,cは,硝酸カリウム,塩化ナトリウム, ミョウバン のいずれかである。 〔実験1] ① 図1のように,ビーカー A,B,C を用意し,それぞれのビーカーに 15℃の 75gを入れた。 ②①のビーカーAには物質 a を, ビーカーBには物質bを, ビーカーCには物 cを,それぞれ20g加え,ガラス棒で十分にかき混ぜ、物質 a,b,cが水に溶け ようすを観察した。 〔実験1]の②では,ビーカーBとCには、白色の物質が溶けきらずに残っていた。 〔実験2〕 ① 〔実験1〕の②の後, ビーカー A,B,Cの水溶液をそれぞれガラス棒でかき準 ながら,水溶液の温度が35℃になるまでおだやかに加熱し, 水溶液のようする 察した。 図 1 ② 全てのビーカーについて水溶液の温 度が5℃になるまで冷却し, 水溶液の ようすを観察した。 2 A B C 1 表1は,〔実験 1] と [実験2] の結果についてまとめたものである。 また, 表2は、硝酸カリ 塩化ナトリウム, ミョウバンについて, 5℃ 15℃, 35℃の水 100gに溶かすことができる の質量を示したものである。 CAUS (A) 白色の物質 5℃のとき a 全て溶けたJR 全て溶けた あったbガスの C 結晶が見られた 結晶が見られた 15℃のとき 全て溶けた 結晶が見られた 結晶が見られた putte 35℃のとき 全て溶けた 結晶が見られた 全て溶けた 表2 までの中から 物質名を押さ 5°C 15°C 35°C 硝酸カリウム 11.7g 24.0g 45.3g 塩化ナトリウム 35.7g 35.9g ミョウバン 6.2g 9.4g 19.8g 36.4 g - O GS

回答募集中 回答数: 0