学年

質問の種類

理科 中学生

(2)②の解き方教えてください 答えは580gです

(2) 明さんは, 動滑車のはたらきを調べるため、 次の実験を行った。 ただし, 100gの物体に はたらく重力の大きさを1Nとし,糸の質量, 糸と滑車の間にはたらく摩擦、糸の伸び縮み は考えないものとする。 【実験】 図 2, 図3の装置のように質量40gの 図2 定滑車や動滑車を使って, 質量500gのおも りを床から10cmの高さまで持ち上げるのに必 要な力の大きさと糸を引いた距離を調べ, 結 果を表にまとめた。 表 図2 図3 力の大きさ [N] 5.0 2.7 糸を引いた距離 [cm] 10 20 図3 一定滑車 ばねばかり 動滑車 一糸 ーおもり 10cm 定滑車 10cm 床 定滑車 ワイヤー 一動滑車 レフック 図5 仕事の大きさを表す単位を何というか, 記号で書きなさい。 (2) 図3でおもりを持ち上げるのに3秒かかった。 このときの仕事 率は何Wか, 求めなさい。 求める過程も書きなさい。 図4のように, クレーンのフックをワイヤーで巻き上げて動か す部分には, 複数の動滑車が使われている。 そこで, 明さんは実 験で使ったものと同じ定滑車と動滑車で図5のような装置を作り おもりを床から10cmの高さまで持ち上げた。 持ち上げるのに必要 な力が1.7 Nのとき, おもりの質量は何gか, 求めなさい。 ただ し、動滑車2つと動滑車をつなぐ板の質量の合計は100gとし, 動滑車をつなぐ板は水平に動くものとする。 図4 巻き上 げ機へ 定滑車 動滑車を つなぐ板 動滑車 ④ 実験の結果をもとに, 明さんがまとめた次の考えが正しくなる おもり 10cm ように, X, Yにあてはまる語句をそれぞれ書きなさい。

解決済み 回答数: 1
化学 高校生

1/10mol/Lを掛けている理由が分かりせん。 教えてください🙏

化学基礎 問9 次の文章を読み、後の問い(ab) に答えよ。 り消毒薬Xに含まれるH2O2 の濃度を過マンガン酸カリウム KMNO4 水溶液 を用いた酸化還元滴定によって調べるため,次の操作 Ⅰ~Ⅲからなる実験を ある生徒は,市販の消毒薬 Xには過酸化水素 H2O2 が含まれていることを知 行った。なお、使用した実験器具は,操作 Ⅰ~ⅢII を行う前にあらかじめ純水で 洗浄してあるとする。 操作Ⅰ ホールピペットを用いて, 100mLのメスフラスコに 10.0mLの消毒 薬Xをはかり取り 純水を標線まで加えた。 操作Ⅱ 操作 I で使用したものとは別のホールピペットを用いて,操作 Iで得 られた水溶液から100mLをコニカルビーカーにはかり取り,希硫酸 を加えて酸性水溶液とした。 操作Ⅲ 0.0100 mol/LのKMnO4 水溶液をビュレットに入れ,操作 IIで得ら れた水溶液を滴定した。 a操作Ⅰ〜Ⅲにおける実験器具の使い方として誤りを含むものを,次の① ~④のうちから一つ選べ。 109 ① 操作Ⅰで用いたホールピペットは,消毒薬 X で内部を数回洗ってから用 いた。 ②操作Ⅰで用いたメスフラスコは,内部が純水でぬれていたため、ドライ ヤーで乾燥させたのち用いた。 ③操作Ⅱで用いたコニカルビーカーは,内部が純水でぬれていたがそのま ま用いた。 ④操作Ⅲで用いたビュレットは, 0.0100mol/L の KMnO 水溶液で内部を 数回洗ってから用いた。

解決済み 回答数: 1
地理 高校生

私の使ってる参考書に国土の大部分がガンジスデルタに位置するとあるんですけど、ガンジスデルタとはこの写真で言うどこら辺のことですか?出来れば写真に書き込んでもらえると助かります🙇🏻‍♀️

70'E 75"E 80'E 85 E 90'E 95E アフガニスタン 35 N 35 N カブールカーブル スラマバード ジャンムー・ カシミール レビンディー 中華人民共和国 マー ラホール」 ブラデー パンジャー チャンディーガル 30 N 30'N セッタラガン ラ パキスタン リヤーナ デリ ネパール アルギーチャルム グラデー www.aflo.com カトマンズ ジャイプルO ラクナウ アッサム ラージャスターン 'カラチ ウッタル プラデーシュ ビハール メガラやら ナガンド ミッチーナ 25 N インド ジャールカンドー バングラデシュニール 北回線 アフマダーバード ◯ボーバール 西ベンガル ミゾウム グジャラート マディア・プラデーシュ コルカタ カルカッタ(0 ダマン・ディーウ ライブル ミャンマー =20°N ナーグプルチャーディースガル ネーピードー 20 N ダードラ及び- [ナガル・ハヴェーリー マハーラーシュトラ オリッ ムンバイ(ボンベイ ブネー ハイダラバー ビジャヤワダ ヤンゴン(ラングーン 15°N 15 N ゴア 「アーンドラ・ プラデーシュ カルナータカ ブドゥッチェリー (ポンディシェリー) www.aflo.com バンガロール チェンナイ(マドラス) 「タミナードゥ ープドゥッチェリー .www.aflo.com ポンディシェリー) 10.N 10°N ラカディーブ アンダマン・ニコバル諸島 ラ ティルバナンタブーラムo スリランカ |スリジャヤワルダナプラコッティ コロンボ 5'N 70'E マレ モルディブ 75°E 80"E 85 E インド 10,000,000 90°E 540 95 E 5N

解決済み 回答数: 1
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
理科 中学生

湿度や飽和水蒸気量のところです 公式は分かるんですけど、どのようにやれば良いのか分からないので答えと解説をして欲しいです よろしくお願いします

114 小数第1位を四捨五入して整数で求めよ。 ただし、窓ガラスの表面の温度と戸外の気 [ 温は同じであるとする。 54% ] 2 【飽和水蒸気量と気温】 右のグラフは、 空気 A, B, Cにおける気温と水蒸気量との関係を示したものである。 次の問いに答えなさい。 よくでる (1) 空気A,B,Cのうちで最も湿度が高いのは30 どれか。 1つ選び, 記号で答えよ。 120 AJINS +他 A 20 ろてん [ 達するか。 [ (2)空気B露点が等しい空気は、 空気 A, Cのど ちらか。 記号で答えよ。 (3) 空気Cの湿度はおよそ何%か。 小数点以下は四 捨五入して答えよ。 [ (4) 空気Aは, 気温がおよそ何℃になると, 飽和に (5) 空気Aの気温が10℃になるまでには, 空気1mについて およそ何gの水蒸気が ] [g/m) 量 10 B C ] 0. 010 20 30 ] 気温(℃) ぎょうけつ 凝結するか。 [ 3 【自然の中の水】 じゅんかん 雲の発生と、自然界での水の循環について、 次の問いに答えなさい。 じょうしょう。 ] (1) 雲は上昇気流の中でできる。上昇気流ができる原因にあてはまるものを、次のア~ エからすべて選べ。 ア. 空気が山の斜面にそって上昇していく。 [ ] イ. 空気が山の斜面にそって下降していく。 ウ. 昼の間、太陽の光が地面の一部をあたためる。

回答募集中 回答数: 0
化学 高校生

この結晶は 答えの組成式だと マイナス1の電荷を帯びてることになりますよね?? だから陽イオンをどっちか2個にしないとだめ?でも単位格子に含まれる原子の数と合わないなと思いテスト中分からなくなってしまいました😭 なぜ、マイナス1の電荷を帯びていていいんですか?

手にドイツの化学者ビクトル・マイヤーによって考案された。 の後,ビクトル・マイヤー法を応用してアルゴンなどの種々の物質の分子量が 測定された。 3 問4 イオン結晶の構造, コロイド a ペロブスカイト型構造の単位格子中には,各頂点に位置す る陽イオンA(●)が 1 8 個ずつ,中心に位置する陽イオンB(O) が1個,各面心に位置する陰イオンX(○)が1/2個ずつ含まれる。 個 8 1個 1-2 個 陽イオン A 陽イオン B 陰イオンX 単位格子中の各イオンの数は, A ×8=1(個) B1(個) X 1/2×6 ×6=3(個) 司会 したがって、このペロブスカイト型構造の化合物の組成式は ABX3 である。 [補足] ペロブスカイト型構造をとる代表的な化合物としてチタン酸カルシウムが あり、組成式 CaTiO で表される (構成イオンは Ca2+, Ti4+, O2 である)。 チ タン酸カルシウムを主成分とする鉱物は灰チタン石とよばれ, ロシアの鉱物学 者ペロフスキーにちなんでペロブスカイトともよばれる。 また, ペロブスカイ ト型構造をとる物質の中には太陽電池や固体電解質の材料として注目され、研 究開発が進められているものもある。 4 bAXおよびBとXが互いに接している状態を考える。 また,単位格子の一辺の長さをα とする。 AとXは,次の図のように単位格子の面の対角線上で互いに接

解決済み 回答数: 1