学年

質問の種類

数学 高校生

an+1とanと2nがそれぞれ表しているものを教えてください

化式 日本 例題 35 図形と漸化式(1) 「平面上にn個の円があって, それらのどの2個の円も互いに交わり,3個以 00000 上の円は同一の点では交わらない。 これらの円は平面をいくつの部分に分け るか。 CHART L & THINKING 漸化式を作成し、解く問題 (求める個数を αとする) 1a1, a2, a3, an とan+1 ・・を調べる(具体例で考える) の関係を考える (漸化式を作成) 1 まず, n=1, 2, 3 の場合について図をかくと、下のようになる。 この図を参考に、 平面の部分は何個増加するだろうか? n=1 基本 29 との式で表した漸化式を作ろう。 円を1個追加すると n=3 n=2 e ⑤ ⑥ ① ② ④ ③ 平面の部分は+2. (交点も+2) 平面の部分は +4 (交点も+4) 一答 AGA カ個の円によって平面が αn 個に分けられるとすると=2 分割された弧の数と同じだ ④ 平面上に条件を満たすn個の円があるとき,更に、条件を満け平面の部分が増える。 たす円を1個追加すると, n個の円とおのおの2点で交わる から交点が2n個できる。 この2n個の交点で, 追加した円 が 2n個の弧に分割される。 これらの弧によって, その弧が 含まれる平面の部分が2分割されるから,平面の部分は 2n 個だけ増加する。元や平面 ① 3 ② 0 ●よって +2n ゆえに an+1-an=2n よって,n≧2 のとき n-1 an=art 2k=2+2.12 (n-1)n=n-n+2 階差数列の一般項が2n k=1 =2であるから,この式は n=1のときにも成り立つ。 したがって, n個の円は平面を (n-n+2) 個の部分に分ける。 | n=1 とすると 12-1+2=2 PRACTICE 35 2 とする。 平面上にn個の円があって, それらのどの2個の円も互いに交わり, 3個以上の円は同一の点では交わらない。これらの円によって, 交点はいくつできる 3

解決済み 回答数: 1
数学 高校生

なぜ、白玉は黒玉より多いの仮説は同じなのですか? また、同じだとした時になぜ7回以上で求められるのですか? 黒と4回ずつとかじゃだめなのですか?

補充 例題 15. 反復試行の確率と仮説検定 00000 箱の中に白玉と黒玉が入っている。 ただし, 各色の玉は何個入っているかわ からないものとする。 箱から玉を1個取り出して色を調べてからもとに戻す 掲げた うこと すると さい る実験 -O 1200 計る。 つの目が 0.035 いったと やす! の方 べてい ことを8回繰り返したところ,7回白玉が出た。箱の中の白玉は黒玉より多 いと判断してよいか。 仮説検定の考え方を用い, 基準となる確率を0.05 とし て考察せよ。 CHART & SOLUTION 「箱の中の白玉は黒玉より多い」という主張に対して,次の仮説を立てる。 仮説 白玉と黒玉は同じ個数である 基本 155 そして,仮説,すなわち,箱から白玉を取り出す確率が1/12 であるという仮定のもとで7回 以上白玉を取り出す確率を求める。 なお、箱から玉を取り出してもとに戻すことを8回繰 り返すから、反復試行の確率(数学A)の考え方を用いて確率を求める。 解答 反復試行の確率 1回の試行で事象A の起こる確率をする。 この試行を回行う反復試行で,A がちょうど回起こる確率は Crp (1-p)-tat r=0, 1,, n なお, "Cr は異なるn個のものから異なる個を取り出して作る組合せの総数である。 箱の中の白玉は黒玉より多い ・・・・ [1] の主張が正しいかどうかを判断するために,次の仮説を立て る。 仮説 箱の中の白玉と黒玉は同じ個数である ・[2] [2] の仮説のもとで, 箱から玉を1個取り出してもとに戻す ことを8回繰り返すとき 7回以上白玉を取り出す確率は (1/2)^(1/2)+oc(1/2)^(1/2)=12(1+8)= 9 -= 0.035...... ◆黒玉を取り出す確率は 256 1-1/2=1/2 である。 これは 0.05 より小さいから, [2] の仮説は誤りであると考え られ, [1] は正しいと判断できる。 したがって、箱の中の白玉は黒玉より多いと判断してよい。 inf条件が「8回繰り返したところ, 6回白玉が出た」 であるなら、6回以上白玉を取り出す確率は 37 *c*()*()*+*c*(+) (+)*+.ca(+) (+)-(+8+28)=-0.14 =0.144...... 256 +8C7 259 これは 0.05 より大きいから、白玉は黒玉より多いと判断できない。 [2]の仮説は棄却されない。 なお、白玉を取り出す回数をXとすると, [1] の主張が正しい, つまり、白玉は黒玉より多いと 判断できるための範囲は、例題の結果と合わせて考えると,X≧7 である。 PRACTICE 1570 AとBがあるゲームを10回行ったところ,Aが7回勝った。この結果から,AはB して考察せよ。 ただし, ゲームに引き分けはないものとする。 より強いと判断してよいか。 仮説検定の考え方を用い, 基準となる確率を0.05 とし

解決済み 回答数: 1
英語 高校生

この英語長文において、印刷技術の発達に必要な技術はどのようなものであるか50~200字で答えてください

木版画 鋳造 第3問 以下の文は、 S. Strandh の “Machines, an illustrated history" からの抜粋で ある。 次の文を読んで、設問に解答せよ。 (ア) The tools of precision mechanics were, without doubt, the technical pre conditions for making wood cuts and for the development of printing. The oldest dated wood engraving is from 1418. It shows fine lines throughout 細部 and a richness of detal, which imply that the tools used, the knives, burins, and so on, must have been eminently suitable At this time, it was only the precision mechanics of clock making which could achieve the technique required for such tools. 精密機械技術 (イ) A (woodcut was produced by transferring a drawing, reversed from left to right, onto a carefully surface-ground "block" of wood, after which the surface wood on either side of each line in the drawing was cut away with a burin of forged steel. The remaining wood on all 'surfaces which were to be white in the drawing were then cut away with gravers and gouges, so that the lines of the drawing became raised. They were then inked and pressed against paper. これは 理由では ないから、 (~のときに、何 が原因か は不明) The woodcut method spread rapidly in the late Middle Ages when pictures were rarity. At first, skilful craftsmen made the woodcuts, but before long, eminent artists were themselves cutting their own drawings in wood. One of the first was the German Albrecht Duerer (1479-1528) who, in 1498, published the famous pictorial series of the Revelation of St. John. Graphics had become an independent art form-based on the progress of precision 酒の mechanics! 可動式の The 1440s saw the first book printed with movable die-cast type. (The letter press printing method used by Johann Gutenberg (1399?-1468) was basically the same as the one used for printing woodcuts, but Gutenberg used cast, movable type instead of cut blocks. The production of dies for the type was made possible by the tools of precision mechanics, too. It does not detract from Gutenberg's contribution that printing with movable type has been practised in the Far East, or more specifically Korea, two thousand years prior to this. Several of the techniques described here, which developed so quickly during the technical revolution of the Renaissance, had had predecessors in other parts of the world. ' 金楼 にねじ を刻む 道具 ~をなら K あったもの

未解決 回答数: 0