学年

教科

質問の種類

英語 中学生

3枚目の写真のような問題って どうやって解くんですか? 私はいつも段落の最初と最後を見てるんですが 一問間違えてしまいました。ぼぼ勘だったりもするので教えて欲しいです🙇‍♀️

いる。 各問いに答えよ。なお, [1] Have you ever seen the 2D codes which have a special mark on the corners? For example, you can find the 2D codes in your textbooks. When you scan them with a tablet computer, you can see pictures or watch videos. Today, a A lot of people around the world use them in many different ways. This type of (2 2D code was invented by engineers at a car parts maker in Japan. [2] When cars are produced, many kinds of parts are needed. Car parts makers have to manage all of the car parts. About 30 years ago, car companies needed to produce more kinds of cars, and car parts makers had to manage many different kinds of car parts for each car. At that time, they used barcodes to manage the car parts, but they could not put a lot of information in one barcode. So, they used many barcodes. Workers had to scan many barcodes. A worker at a car parts maker had to scan barcodes about 1,000 times a day. It took a lot of time to scan them. The 0 000742 221101 barcode (バーコード) workers needed some help to improve their situation. [3] The engineers at a car parts maker in Japan knew the situation of the workers. They started to learn about 2D codes because 2D codes can contain more information than barcodes. There were already some types of 2D codes in the U.S. One type could contain a lot of information, but it took a lot of time to scan that type. Another type was scanned very quickly, but it contained less information than other types. The engineers at the car parts maker did not use these types. They decided to create a new type of 2D code which had both of those good points. The engineers needed a long time to create this new type which could be scanned quickly. Finally, they thought of an idea. They thought, "If a 2D code has a special mark on the three corners, it can be scanned very quickly from every angle." In this way, the new type of 2D code with special marks was invented by the engineers at a car parts maker in Japan. 2D code

未解決 回答数: 1
理科 中学生

(3)の②の解説お願いします 答えはウイです

4 次の文章を読んで、あとの問いに答えなさい。 Yさんの組では、一定の質量の酸化銅から銅を完全に取り出すときに必要な活性炭の質量を調 べるために, 1班から5班に分かれて次の実験を行った。 図1 実験 A 班ごとに、 酸化銅 8.0gと表に示した質量の活性炭をはかりとり よ く混ぜ合わせた。 B 図1のように,試験管にAで混ぜ合わせた酸化銅と活性炭を入れ, ピンチコック, ゴム管などを用いて装置をつくった。 各班とも、この装置を用いて, 以下の実験を行った。 C図1の装置の質量をはかったのち, スタンドに固定した。ゴム管の 先にガラス管をつけ、図2のように石灰水を入れた試験管にガラス 管を入れた。 図2 トピンチコック ゴム管 酸化銅の質量〔g〕 活性炭の質量〔g〕 Cではかった加熱前の装置の質量〔g〕 Fではかった加熱後の装置の質量〔g〕 [加熱後の試験管内の物質の質量〔g〕 7.3 ア 酸化銅と活性炭 イ銅と活性炭 ウ 酸化銅と銅 153 変化と物質の質量の変化 酸化銅と 活性炭の 混合物 D ピンチコックを開け, ガスバーナーで加熱すると気体が発生した。 E 気体が発生しなくなったあと、石灰水を入れた試験管からガラス管 を取り出し, 加熱をやめ, ピンチコックを閉めた F 装置の温度が下がってから,Cでつけたガラス管をはずし、装置の質量をはかった。 G 加熱後の試験管内の物質 の質量を,実験結果をも とに計算で求めた。 H 各班の実験結果を、 右の 表のようにまとめた。 (1) 実験のEにおいて,加熱をやめる前に石灰水を入れた試験管からガラス管をとり出すのはなぜ か、理由を書きなさい。 [ [] 2) 酸化銅のような酸化物から酸素がとれる化学変化を何というか,書きなさい。[ 」 加熱後の試験管内の物質について,表をもとに,次の ①,②に答えなさい。 ①次の文が,実験のGにおいて, 加熱後の試験管内の物質の質量を計算で求める方法を説明し たものとなるように,( )に適切な文を書きなさい。 (20) ガラス管 石灰水 5班 8.0 0.4 0.6 0.8 1.0 1.2 56.9 57.1 57.3 57.5 57.7 55.8 55.4 55.1 55.3 55.5 6.9 6.6 6.8 7.0 1班 2班 3班 4班 8.0 8.0 8.0 8.0 1 ] 014 201 酸化銅と活性炭の質量をたした値から,( )を引く。 DENG 加熱をやめたあとの 1班 2班の試験管内と, 45班の試験管内にある物質として考えら れる最も適切な組み合わせを,次のア~ウからそれぞれ選び,記号で答えなさい。 1班 2班 [ ] 4・5班 [ (1) ]

未解決 回答数: 1