学年

教科

質問の種類

英語 中学生

3枚目の写真のような問題って どうやって解くんですか? 私はいつも段落の最初と最後を見てるんですが 一問間違えてしまいました。ぼぼ勘だったりもするので教えて欲しいです🙇‍♀️

いる。 各問いに答えよ。なお, [1] Have you ever seen the 2D codes which have a special mark on the corners? For example, you can find the 2D codes in your textbooks. When you scan them with a tablet computer, you can see pictures or watch videos. Today, a A lot of people around the world use them in many different ways. This type of (2 2D code was invented by engineers at a car parts maker in Japan. [2] When cars are produced, many kinds of parts are needed. Car parts makers have to manage all of the car parts. About 30 years ago, car companies needed to produce more kinds of cars, and car parts makers had to manage many different kinds of car parts for each car. At that time, they used barcodes to manage the car parts, but they could not put a lot of information in one barcode. So, they used many barcodes. Workers had to scan many barcodes. A worker at a car parts maker had to scan barcodes about 1,000 times a day. It took a lot of time to scan them. The 0 000742 221101 barcode (バーコード) workers needed some help to improve their situation. [3] The engineers at a car parts maker in Japan knew the situation of the workers. They started to learn about 2D codes because 2D codes can contain more information than barcodes. There were already some types of 2D codes in the U.S. One type could contain a lot of information, but it took a lot of time to scan that type. Another type was scanned very quickly, but it contained less information than other types. The engineers at the car parts maker did not use these types. They decided to create a new type of 2D code which had both of those good points. The engineers needed a long time to create this new type which could be scanned quickly. Finally, they thought of an idea. They thought, "If a 2D code has a special mark on the three corners, it can be scanned very quickly from every angle." In this way, the new type of 2D code with special marks was invented by the engineers at a car parts maker in Japan. 2D code

未解決 回答数: 1
理科 中学生

5番の(2)教えてください

【話し合い】 夏希さん: カメラのしくみを調べるために段ボールと, 薄紙のスクリーンを用いて簡易カメラをつくっ たよ。 千秋さん : 中づつにあるスクリーンをのぞくと周りの景色が上下左右逆にうつるね。 |夏希さん: 中づつの位置を変えると像がぼやけることに気づいたよ。 千秋さん: 凸レンズから物体までの距離と、物体の像がはっきりとうつるときの凸レンズからスクリーン までの距離との関係を調べてみよう。 【実験2】 <方法> ① 凸レンズの軸に平行な光を当て て焦点を調べ, 焦点距離をはかる。 ②①で焦点距離を調べた凸レンズ, 段ボール, 薄紙でつくったスクリー ンを用いて図5のような簡易カメ ラをつくる。 また, 凸レンズから スクリーンまでの距離は, Ocmよ りも大きく36cmよりも小さい範囲 で移動できるようにする。 図5 凸レンズからスクリーンまでの距離は、 36cmよりも小さい範囲で移動できるよう にする。 表3は, 実験の結果をまとめたものである。 表3 物体の位置 凸レンズから物体までの距離 ア イ ウ 焦点距離の1.5倍 焦点距離の2倍 焦点距離の3倍 凸レンズの 軸に平行な 3本の光 物体 イア ③ 物体を図5のア、イ、ウの位置に置き, 中づつを動かしながら, 像がはっきりとうつるときの凸 レンズからスクリーンまでの距離を調べる。 <結果> ①の結果,実験で使用した凸レンズの焦点距離は, 12cmであることがわかった。 凸レンズ スクリーン 外づつ 像がはっきりとうつるときの 凸レンズからスクリーンまでの距離 焦点距離の3倍 焦点距離の2倍 焦点距離の1.5倍 理4 中づつ 3 実験2の① で, 凸レンズの軸に平行な3本の光を当てたとき, 光が凸レンズを通る道すじを図6に 表しなさい。 ただし, 方眼紙の1マスは1cmとし, 屈折は凸レンズの中心線で1回だけするものとし ます。 凸レンズの中心線 図6 凸レンズの軸 4 実験2で凸レンズからスクリーンまでの距離が焦点距離よりも短いとき, スクリーンにはっきり とした像をうつすことはできません。 その理由を書きなさい。 5 千秋さんは図5の簡易カメラを使って, 物体の像をスクリーンにはっきりとうつしたいと考えまし た。 次の(1), (2) の問いに答えなさい。 (1) 凸レンズから物体を遠ざけていくとき, 物体の像をはっきりとうつすためには、スクリーンの位 置を変える必要があります。 物体をしだいに遠ざけていくと, スクリーンは凸レンズから何cmのと ころに近づいていきますか。 整数で答えなさい。 (2) この簡易カメラを使って, 物体よりも大きい像をスクリーンにはっきりとうつすためには、凸レ ンズからスクリーンまでの距離は,何cmよりも大きく, 何cmよりも小さい範囲となりますか。 整数 で答えなさい。 日本 技術 (PR)

回答募集中 回答数: 0