学年

教科

質問の種類

化学 高校生

逆滴定の問題での、有効数字の扱い方なのですが、 問題文では、有効数字が3桁になっているのになぜ、答えでは有効数字2桁で答えるんですか???

30 ことか 物質量を求めることができる。 問題4 アンモニアの逆滴定 0.0500mol/Lの希硫酸20.0mL に, ある量のアンモニアをすべて吸収させた。 指示薬としてメ 12.5mL滴下したところで過不足なく中和した。 希硫酸に吸収させたアンモニアは何mol か。 チルレッドを加え, 未反応硫酸を0.100mol/Lの水酸化ナトリウム水溶液で滴定したところ, | 中和が過不足なく起こるとき, 次の量的関係が常に成り立っている。 酸から生じる H+の物質量=塩基が受け取る H+の物質量 硫酸H2SO4 とアンモニア NH3 の反応 では、H2SO4が過剰に存在し, H+ が余 る。余ったH+は,水酸化ナトリウム NaOH水溶液で滴定される。 物質量の和に等しい H2SO4 から生じる H+の物質量 NH3 が受け取るH+の物質量 NaOH が受け取る H+の物質量 したがって, アンモニアの物質量をx[mol]とすると, H2SO4は2価の酸, NH3 と NaOH は1 価の塩基であるので,次式が成り立つ。 2×0.0500mol/Lx 20.0 1000 L = 1xx [mol] + 1×0.100mol/Lx 12.5 1000 H2SO4 から生じる H+ NH3 が受け取る H+ NaOH が受け取る H+ したがって,吸収させたアンモニアは,x=7.5×10mol簪である。 L (NaOH) Hel 0 15 2.00mol/Lの水酸化ナトリウム水溶液 10.0mL に, ある量の気体の塩化水素を吸収させた。 未反応の水酸化ナトリウムを, 1.00mol/L塩酸を用いて中和滴定したところ, 15.0mL を要 した。 吸収させた塩化水素の体積は、 0℃, 1.013×105Paで何mLか。 TRY 5 アンモニアを過剰量の希硫酸に吸収させた。この混合水溶液を水酸化ナトリウム水溶液で 滴定するとき, メチルレッドではなくフェノールフタレインを指示薬に用いると、 正確に 終点が測定できない。 それはなぜか。 Check 酸と塩基が過不足なく中和したとき,酸と塩基の間に成り立つ関係を説明しよう。 157

未解決 回答数: 2
化学 高校生

③から②になるのは、環の下側が右側、環の上側が左側にくると考えて分かったのですが、②から①が分かりません。回転させたらそうなるっていうのも、なんで回転角が120度になるのかも分からないです。あと、そもそもなんで回転させないといけないのかも分かりません。フィッシャー投影式は、... 続きを読む

糖類の立体化学= Stereochemistry of sacoharides 糖類の立体表記 にSO Naは Hooher 投影式で表し. 環状構造は Haworth 投 男本類の立体表記 1 @ou @o @o G 4 の②ブ CHO NE Ho この鎖状構造を時詩回りに回しで横に SO | 倒してから(⑥). ヒドロキシ革を示) 議 9 の |記よす mei ロー一OH \ ミル革に付加させる(③)。 ツル寺 @人な Ho一c一H 1 さき る に 0 OH ョーーを o [ し 1 Hロ一G一OH ー総鐵 @ な ら@ | のAS H い OH 人び 人る 0 にol HoO'Chz一で一H @ CHzoH NN 1 0 0 分子モデル くさのび形モデル Fische ッシャー ログ ischer(フィ 人 )投影式 @ 鎖状のグルコース分子は, 分子内にヒドロキシ基と ミ ら ミ 【 上 ホルミル | 鎖状構造から環状構造にするために, ホ テか計るため 分子内で付加友応が起こつて環状のへミ | ルミル基に付加するヒドロキシ種が一番 ル構造(同一炭素にヒドロキシ基とエーテル結合を 1 | 下にくるように, C4C5 を 190" 回転 個ずつ含んだ構造)が形成され. 環状構造をとるようになる。 | せる(①)。 K3 @ ョクル の Heworth(ハース)投影式 ゥヶ-グルコース g-グルコース 2 これをヒドロキシ基と水素原子の相対的な上下関係に注意して立体 | このとき Fischer 投影式の石人 的に表すこともできる(⑥⑤, ⑥)。さらに, 鎖状構造から環状構造に キシ基は上側になる。また, なると, 不斉炭素原子の数が 4 個(2. 3, 4.5 位の炭素原子)から | 方になるように書く(④)。 < 5 個(7, 2. 3. 4, 5位の炭素原子)になる。 大アノマー炭素 *oHeOH "oheOH リ Cm人 5へ か 1 人語 が

未解決 回答数: 1
化学 高校生

RHEED法の原理と得られる7つの情報が、この英文に書かれているみたいなのですが、よく分かりません。 分かる方助けてください!🙇‍♂️

INTRODUCTION Reection high-energy electron diHiraction (RHEED) uses a Rnely collimated electron beam with energy of 10-100 keV. The beam irradiates a sample surface with gazing incidence to obtain forward scattered difraction patterms. RHEED enables us to analyze structures of crystal surfaces at atomic levels and also to in situ monitor growth processes of thin films (mo、1988: Ichimiya and Cohen、2004: Peng et al.. 2011). From the arrangement。intensity and profile of the dilraction spots in RHEED patterns as described below in detail、 one can obtain various kinds of information: (1) the periodicity (unit cells) in atomic arrangements. (2) flat- ness of surfaces. (3) sizes of grains/domains of surface structures and microcrystals grown on the surface. (3) epitaxial relation between the grown flms/islands with respect to the substrate. (5) parameters character- izing structural phase transitions. (6) individual atomic positions in the unit cells. and (7) growth styles of thin films and numbers of atomic layers grown. The most important advantages of the method are that it is quite easy to install the RHEED apparatus in Yarious types of vacuum chambers without interfering with other components of apparatuses and to do real- time monitoring during thin-Rlm growths. Because of these advantages.RHEED is nowwidelyusednotonlyin research Iabs of surfaces and thin fims. but also in device production processes in industry Low-energy electron diiraction (LEED、see article Low-ENNERcy ErecroN DirscmoN)。 in which an electron beam of 10-100 eV in energy is irradiated onto a sample surface with nearly normal incidence to obtain back- scattered difraction patterns. is also widely used to analyze the atomic structures of crystal surfaces. Since one has to make the sample face directly to the LEED

未解決 回答数: 1