学年

教科

質問の種類

化学 高校生

中和反応のモル濃度のところの解き方が分からないので教えてください。

例題032 中和反応の量的関係 0.50mol/Lのシュウ酸水溶液10㎡Lを過不足なく中和するのに, 濃度不明の水酸 化ナトリウム水溶液 25mLが必要であった。この水酸化ナトリウム水溶液のモル濃度を求めよ。 例題033 滴定曲線 次の図は, 0.1mol/L の酸と塩基を用いて中和滴定を行ったときの滴定曲線を示したものである。 酸と塩基は何を用いたか。ア~エからそれぞれ選べ。 13F 13日 13 10 10 中和点 10 pH 7 中和点 pH 7 pH 7 中和点 4 4 1 1 10 20 0 10 20 0 10 20 滴下量(mL) 滴下量 (ml) 滴下量(mlL) ア.水酸化ナトリウムと酢酸 イ.水酸化ナトリウムと塩酸 ウ.アンモニアと酢酸 エ.アンモニアと塩酸 例題034 塩の分類と塩の水溶液 (1)次のア~ウから酸性塩を選べ。 ア、塩化カリウムイ. 炭酸水素ナトリウム ウ. 硝酸アンモニウム (2)(1)のア~ウから, 水溶液が酸性を示すものを選べ。 139 中和反応 次の中和反応を化学反応式で示せ。 (1)酢酸と水酸化ナトリウム CH3CO0 H + Neod CHocooNot Hoの (2) 硫酸と水酸化ナトリウム 504 + NaoH -N304 (3) アンモニアと炭酸 NH3* Cの (4) 水酸化カルシウムとリン酸 CaOH POd 5)硫化水素と水酸化アルミニウム HSO』+AO 5) 塩酸と水酸化カルシウム HCIO

未解決 回答数: 1
化学 高校生

問1なのですが解法を見てもさっぱりわかりません。なぜCl-のモル濃度を求めた後に溶解度積をつかうのでしょうか?Ag+は全て反応しきってるという認識で解説を読んでいたのでよくわからなくなりました。誰か解説をお願いいたします。

と。 塩化物イオン CI-やヨウ化物イオンIは水溶液中で銀イオン Ag" や鉛(II)イオンPb?t, 2+ 応して難溶性の塩をつくる。難溶性の塩の飽和水溶液では溶解平衡が成り立っていると考えら る。電離式に化学平衡の法則を適用すると,固体の量は平衡に影響を与えないので, 平衡宗新。 電離式中のイオンのモル濃度のみを用いて表され, その値は温度が変わらなければ常に一定で る。このような定数を溶解度積という。これについて, 下記の各問に答えよ。ただし, logio2s 0.30, log1o 3 = 0.48 とし, 溶解度積は次の値を用いること。 上り 塩化銀 AgCI [Ag*][CI-] =Ksp(AgCI) = 2.0×10-10(mol/L)? ヨウ化銀 AgI [Ag*][I]=Kap (AgI) = 2.0×10-14 (mol/L)? 塩化鉛(II) PbCl2 [Pb?+][CI]? =Ksp(PbCl2) = 1.8×10-5 (mol/L)° 問1 C とIをそれぞれ0.300 mol/L, 0.100 mol/L で含む水溶液 500 mL に, 0.300mol/ の硝酸銀水溶液500 mL をよく撹押しながら加えたところ, 沈殿が生じた。 このとき上澄み に含まれる CI-およびI~のモル濃度はそれぞれ何 mol/L か。 有効数字 2 桁で答えよ。 m目 の 20×10-2 mol/Lの硝酸鉛(IⅡ)水溶液に塩化ナトリウム水溶液を少しずっ加えたときの 24 の の明 は おハ

回答募集中 回答数: 0
化学 高校生

18なんですけど気体なのになんで2倍 H 2とかにならないんですか、?

ネオンおよびアルゴンを。 2の 語ot r の傘下 20てで何中が 最も適当な数伯。 PP 積60 補 aeのEカ a和の7は 軸凍の っ混信っている* rp と 数ル=89X10'Perr/(mol.k) の⑳ - 0 の2ちから一2選70 He=40. NOT ⑳"65x10' @ 10X10 訪 @ 79, 所人の分圧華了 較のよう 容積40Lの 1.0X10 Pa のヘリウムが 谷本 1.0L の容器Bには5. ルプンが入っている。コックを開い つの気体を混合し きら 混合気体の金正は何 Fa か。 最も適当な雪信も xの20-092 請 】 からーフ選べ。ただし, コック部の容積は無視する* また, 容器 全n( 4 Bに入っている気体の温度は同じであり, paの前和で変わらないものとする の10xi0 @⑳12xi0 @18x0 @ 30x1 @ 42x10' @ぐ60xio @ 20X10 ⑯ 33xos Ke 【2015 本委 20. 温人気体の質量 (現晃 ドラ 容 . ドライアイスの小片と 92g のエタノールを, 容積83L の和密閉容器 8 完全に に に比例する。 Po さらに温度を上げて 127 てにすると, この2 種類の気体の分圧は ぁ のカ条の天とキン Ll 0 になった。ドライアイスの質量[g]と して最も適当な数値を 次の0このうちヵ | 物質量(mo モル質量【g/moD ょり, それぞ 8 0 C=12。 0=16, 気体定数=83X10'ParL/(moLK) ) 22 ⑳44 @⑳11.0 @258 9上 ーー pa にad 改 "40g7 1 27. 混と 7 ニ0.50 mol 圧力 (丈及 次の物質アー ze二 2057相 0.50 mo の般団温度を変化させた。 人 0-100で 人 との箱合せとして最も適当 変化を図示す。 直線または茹線a ルー40g7ol 最も道当なものを, 次の0 - 0のうちから一つ選べ 較 に 語気体の物質便の和は, 3.25 mol となる= ァ 00 | 0 ーー よ た 気人の汰介方式を変形し pーーy より 004 mo】 の窒素 c d ウ 007moの水 0のdg ウ 隊 325 melx83X10' ParL/(moLK) X299K 60L 還 9 に 0.03 mo7 のジェチル 0着陸2較2中用 | ィ 1隊 .7CTikBTSSA 0 隊5に 一 この

未解決 回答数: 2
化学 高校生

RHEED法の原理と得られる7つの情報が、この英文に書かれているみたいなのですが、よく分かりません。 分かる方助けてください!🙇‍♂️

INTRODUCTION Reection high-energy electron diHiraction (RHEED) uses a Rnely collimated electron beam with energy of 10-100 keV. The beam irradiates a sample surface with gazing incidence to obtain forward scattered difraction patterms. RHEED enables us to analyze structures of crystal surfaces at atomic levels and also to in situ monitor growth processes of thin films (mo、1988: Ichimiya and Cohen、2004: Peng et al.. 2011). From the arrangement。intensity and profile of the dilraction spots in RHEED patterns as described below in detail、 one can obtain various kinds of information: (1) the periodicity (unit cells) in atomic arrangements. (2) flat- ness of surfaces. (3) sizes of grains/domains of surface structures and microcrystals grown on the surface. (3) epitaxial relation between the grown flms/islands with respect to the substrate. (5) parameters character- izing structural phase transitions. (6) individual atomic positions in the unit cells. and (7) growth styles of thin films and numbers of atomic layers grown. The most important advantages of the method are that it is quite easy to install the RHEED apparatus in Yarious types of vacuum chambers without interfering with other components of apparatuses and to do real- time monitoring during thin-Rlm growths. Because of these advantages.RHEED is nowwidelyusednotonlyin research Iabs of surfaces and thin fims. but also in device production processes in industry Low-energy electron diiraction (LEED、see article Low-ENNERcy ErecroN DirscmoN)。 in which an electron beam of 10-100 eV in energy is irradiated onto a sample surface with nearly normal incidence to obtain back- scattered difraction patterns. is also widely used to analyze the atomic structures of crystal surfaces. Since one has to make the sample face directly to the LEED

未解決 回答数: 1