学年

教科

質問の種類

数学 高校生

KP②-5 ソタについてなのですが、確率変数Wは卵1個の重さを表しているのは理解してるのですが、2枚目の写真の黄色のところと緑のところが同じ?置き換え?られてる理由がわかりません。 どなたかすみませんがよろしくお願いします🙇‍♀️

数学II, 数学 B 数学 C (2)養鶏場Kで収穫される卵1個の重さ (単位はg) を表す確率変数をWとする。 Wは母平均が m, 母分散が の正規分布に従うとする。 ただし,とは正の 実数である。 確率変数を Z= 0 W-mで定めると,Zは平均 サ,標準偏差 シ の正規分布に従う。 EXX -1≦Z≦1 となる確率は0. スセであるから,養鶏場Kで収穫された卵か ら1個を無作為に抽出するとき,その卵の重さw タ 5 となる確率は0. スセであることがわかる。 20 平均 m に対する信頼度 95%の信頼区間は 1である。(64.0.14) 母平均m を推定してみよう。 養鶏場K で収穫された卵から400個を無作為に 抽出し, 重さを調べた結果, 標本平均は 64.0g, 標本の標準偏差は5.0gであっ た。 標本の大きさが十分に大きいときには, 母標準偏差の代わりに標本の標準偏 差を用いてよいことが知られている。 標本の大きさ400は十分に大きいので母 チ タ の解答群(同じものを繰り返し選んでもよい。) 0.87 0.95 ①m+o ②m+20 -0 ④ m-o m-20 チ については,最も適当なものを,次の①~⑤のうちから一つ選べ。 ⑩ 61.1mm 66.9 61.8mm 66.2 ④ 63.5≧m≦ 65.9 ① 61.8mm 64.5 62.7mm 64.5 ⑤ 63.5mm≦64.5 (数学II, 数学B, 数学C第5問は次ページに続

未解決 回答数: 2
生物 高校生

答え⑤③ 読み取り方が分かりません💦

する による する)ほ るカリウ 塩水に浸 と手 べ 変化! 第4問 反射経路と聴覚器に関する次の文章 (A・B) を読み、後の問い (間1~4) に答えよ。 (配点 17) A 動物は、感覚器によって食物や捕食者の存在を感知し、 適切に反応することで 生命を維持している。 ヒキガエル (以下, カエル)は眼から得られる情報にもとづ いて、御となる対象には正面で向き合うようにからだを動かし (対向行動),外敵 に対しては、対象から遠ざかる反応 (回避行動) を示す。 あるカエルにさまざまな 大きさの正方形の黒い紙を動かして見せ、反応を観察すると, 表1の結果が得ら れた。 表 1 紙の一辺の長さ (mm) 1 2 4 8 32 48 反応 無反応 対向対向 対向 回避 回避 カエルの眼からの信号を伝える神経繊維は, 間脳にある前視蓋や(a) 中脳にある 視蓋とよばれる部位に連絡し、そこで行動に関与するニューロンに連絡している。 つまりカエルでは, 前視蓋や視蓋が,視覚刺激に応じた行動の中枢となっている。 カエルの前視蓋と視蓋に電極を挿入して,さまざまな大きさの正方形の黒い紙を 動かして見せたときに, 前視蓋および視蓋から出るニューロンの活動電位の発生 から出るこ を観察したところ,表2の結果が得られた。 FORFEW.COM 問1 下線部(a)に関する記述として最も適当なものを, 次の①~⑤のうちから一 つ選べ。 18 ① 間脳や延髄などとまとめて, 脳幹とよばれる。 ②外側が灰白質、内側が白質になっている。 小 ③内部には、海馬とよばれる部位がある。 大脳 ④多くの神経分泌細胞が存在している。 間脳・視床 ⑤哺乳類では,呼吸運動の中枢となっている。 延髄 問2 図1は、カエルの対向行動や回避行動に関わる中枢における神経の連絡経 路を模式的に示したものである。 図1について,表 1・2の結果から推測 できることとして適当なものを,後の①~⑥のうちから二つ選べ。ただし、 解答の順序は問わない。 Wase& 19 眼からの 信号 a 前視蓋 20 視蓋 時間 運動した後に に発生する活 なものを、後 RASTE れだちにつちゃん2 (3) 紙の一辺の長さ (mm) 1 前視蓋 2 B14 8- + + : 活動電位の発生頻度が増加 活動電位の発生頻度に変化なし 32 48 ++ + - - 32148. C. AND d 死に 図 1 うふんで対向 ①神経繊維 a は、 回避行動をとるべき大きな対象物を見たときにのみ興奮 する。 対一回 ②神経繊維bは、見た対象物が小さい場合は興奮するが、大きい場合は興 奮しない。 逆 ④神経繊維dとeは,同じ骨格筋細胞とシナプスによって接続している。 わがつ ③神経繊維の末端では、抑制性の伝達が行われる ⑤前視蓋が破壊されたカエルでは、大きな対象物に対しても対向行動をと る可能性がある こ 。 ⑥ 視蓋が破壊されたカエルでは、対向行動も回避行動もみられなくなる。 22

回答募集中 回答数: 0
生物 高校生

答え② ①②③④それぞれ考え方が分かりません💦

第2問 減数分裂と動物の発生に関する次の文章を読み,後の問い (問1~3) に答えよ。 (配点 14 ) 有性生殖を行う生物では, 生殖細胞が形成されるときに (a) 減数分裂が起こり, 1 個の母細胞から4個の娘細胞が生じる。 娘細胞は卵や精子などの配偶子になる。 カエルの発生では受精の際に,精子が卵に進入してから卵割が始まるまでに, 進 入点の反対側の卵の表面が灰色に変化し, 背腹軸がこの時期に決まる。 受精卵は, 卵割をくり返すと桑実胚になり、さらに卵割が進むと胞胚になる。 原腸胚になると 陥入が始まり, 原口が形成される。 神経胚では(b)形成体(原口背唇部) から誘導物質 陥入が始まり,原口が形成される。神経胚では(b) が分泌され、外胚葉域にはたらきかけて神経が誘導される。 問1 下線部(a)に関する記述として最も適当なものを、次の①~④のうちからー (1) つ選べ。 9 ①減数分裂の第二分裂終了後の娘細胞のDNA量は, 第一分裂直前の母細胞 にの半分になる。)(3)に や ②減数分裂の第一分裂直前の母細胞のDNA量と, 第二分裂終了後の4個の 娘細胞のDNA量の総和は等しい。 ③動物では、1個の卵原細胞から1個の卵ができる。 ④ 減数分裂により1個の母細胞から生じた4個の娘細胞は, それぞれ2組 闘のゲノムをもつ。

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
物理 高校生

高高校校物理です 高校物理です。 解答解説がないので全くわかりません。説明も合わせてお願いします。

7 量の質点をばね定数 kのばねの一端につなぎ,他方の端を固定した単振動の実験 A,Bを考える。 次の問いに答えよ。 ここで,振動中の空気抵抗, ばねの質量は無視でき るほど小さいとする。 重力加速度の大きさを9, 円周率をとする。 実験A 図1のように,この質点とばねが水平でなめら かな床の上にあって, 質点が振幅 L, 周期Tで単振動 している。ここで,質点と床との間の摩擦力はないも のとする。 (1)kを与えられた文字を用いて答えよ。 ばね定数 0000- m 図1 水平方向に 運動するばねと質点 (2)この単振動時の質点の最大の速さを与えられた文字を用いて答えよ。 いま、上記の単振動で, m = 1.0kg,T= 2.0s, L=0.50m, π=3.14 とする。 (3)これらの数値の単振動で, 質点の最大の速さはいくらか, 有効数字2桁で答えよ。 実験B 図2のように, 同じばねの上端を固定し, 質量の質点 をばねの下端につけてゆっくり下方に下ろすと, 自然の長さより も長さ Sだけ伸びた位置で静止した。 (4)Sをk, m, g を用いて答えよ。 次に, ばねが自然の長さとなる位置まで質点を持ち上げてから 静かに落下させると, 質点は鉛直方向に単振動した。 (5)この場合,質点の最大の速さ VM をk, mg を用いて答えよ。 VM (6) 質点の速さが一 示して答えよ。 m ばね定数 k となる質点の位置はどこか, 基準の位置を 図2 鉛直方向 に運動するばね 点

未解決 回答数: 0
数学 高校生

青チャート数Bの統計の分野です。 P(k)までは合ってるっぽいんですけど、以降の計算でΣ[k=1,n-2]kP(k)を、P(n-1)とP(n)は0だと思ったのでΣ[k=1,n]kP(k)にして計算したら間違ってました。おそらく何か勘違いしてるので、どなたか説明してくれませんか。

(2) E(X)-kp-kn(n-1) n(n-1) (nk-k²) = n(n=1) {n • \/ \n (n+1)= | | (n+1)(2n+1)} 2 = n(n-1) = n(n+1)(3n-(2n+1)) n+1 6 3(n-1)(n-1)=n+1 3 また E(X)=R²-k²- 2(n-k) n(n-1) n(n-1) (nΣk²-k³) 2 72° また、に関係しない の式を 前に出す。 =(n+1) -n(n+1)(2n+1) =(-1) { //1n(n+1)(2n+1)-1/13r(n+1)} = 1/2(+1) n(n+1) 6 よって_V(X)=E(X*)-{E(X)n(n+1)_(n+1) (n+1)(n-2) 18 本 (nは3以上の整数) のくじの中に当たりくじとはずれくじがあり、そのうちの ② 66 2本がはずれくじである。このくじを1本ずつ引いていき、2本目のはずれくじを 引いたとき、それまでの当たりくじの本数をXとする。 Xの期待値E(X)と分散 V (X) を求めよ。 ただし, 引いたくじはもとに戻さないものとする。 [類 新潟大 p.519 EX 39.40 出るこ るときであるか [2]Zのとりうる よって、(1)から 二項定理により ゆえに、 Zn個の確率 副題の(2)は,次 knに対し X. 2 Xs........ EC 2以上の自 勝った人の数 (1) ちょうど (2)Xの期待 X-Omer P(x+c) = t h PD U ( n n y ) Ci me Pry=2)= (+ 1-2 A-3) 3 (+ P ht (n-2) -3 n-14 h (例2 (Pf) (=(n-2)/(h= h-1-k (h)! n(h+1) \^<2)! (^^-*) W (m-k)? (+) Ex)=l=k-1 2k+1) =h(n-1) ht 573072. pm. Proof={ \+) (2011) + {ach+i)} = +11 + (2n++ b + 4) h-1 2(n+1)(nt) == n-1. 3(h-1)

回答募集中 回答数: 0