学年

教科

質問の種類

情報:IT 高校生

15番の問題を教えてください

B 次の文の( )に入る適切な語句を記入しなさい。 バランスをシミュレーションしたい。 ある日 ( 0日目)の始めの牧場の草の量をxとする。牧場のヤギが1日に 食べる草の総量をy, 草の1日の増加率をeと仮定する。 また, モデルを簡 略化するため,草は1日の始めにeの倍率で増加すると考える。 0日目の終わりのときに残っている草の量は, ヤギが1日に食べる草の量と草が自然に増える量から, 牧場の草の需給 ① Xo ②2 y 3 e (5 y ) - (② )で示される。 (6) 草の増加率はeであるから, 1日目の始めの草の量x」は e x1 = =(③ ) x ((Ⓡ Xn- )) 草の量をxとすると, で示される。したがって、n-1日目の始めの草の量をx1日目の始めの Xo=X1 8 z (9) Xn= 9) = )x((® )) となる。このとき, 草が恒久的になくならず,かつ増えすぎないようにす るには,草が次の日の始めに同じ量に回復すればよい。 このとき, 0日目 と1日目を例に考えると,x0 とx」の間に (⑨ 立つことが分かる。 (10 X1 11 e 12 Xo の関係式が成り 13 20 そこで, ヤギが食べる草の量を観察したところ, y = 20kgであることが 分かった。よって, 草がなくならないためには, 0日目と1日目を考えて, X0, X1, e を用いた式で表すと, 14 1.25 b )=(Ⓡ )) が成り立つ。 0日目の始めの草の量が100kgであるとすると, 上の式と (⑨) の式から e=( )x((2 11)-( であれば,草は恒久的になくならず,かつ増えすぎないようになると分かる。 よって,草に与える肥料などを工夫して, 草の増加率が上記の値になる ように調整すればよいと考えられる。 ここで仮に, e= 1.1 だとすると, 草は ( 日目のうちに枯渇 する。現実的には,ヤギの食性や草の生育には天候・温度などさまざまな要 因が関係することが考えられるため、本来はより詳細なモデルが必要となる。 100=100-200 Xiex(Xo-20) x=11x(x-20) x=1.1x-2.2 X-1.1x=-2.2 ==+2.2 X=22 22

回答募集中 回答数: 0
物理 高校生

式の立て方はわかるのですが、どうして振動の中心が変わるのかわかりません。教えて頂きたいです🙇

52. <あらい面上で振動する物体の運動〉 ばね定数 質量m 図のように, 水平なあらい床の上に質量mの物 体が置かれている。 物体はばね定数んのばねで壁と つながっている。 右向きにx軸をとり, ばねが自然 の長さのときの物体の位置を原点とする。 次の問い に答えよ。 ただし, 重力加速度の大きさをgとする。 物体を原点より右側で静かにはなす実験を行った。物体を位置 d(> 0) より左側ではなす とそのまま静止していたが,右側ではなすと動きだした。 (1) 物体と床の間の静止摩擦係数μを求めよ。 0 x 物体を位置 x(>d) から静かにはなすと, 物体は左向きに動きだした。 その後, 物体の速 さは位置 x1 (<-d)で初めて0となった。 (2) 物体と床の間の動摩擦係数μ' を求めよ。 (3)物体の加速度をαとして,左向きに運動している物体の位置xでの運動方程式を示せ。 (4) 物体が x から x1 に移動するまでにかかった時間を求めよ。 (5)xo から x1 に移動する間で, 物体の速さが最大となるときの位置と速さを求めよ。 その後, 物体は右向きに動きだし, ある位置 (>d) で再び速さが0となった。 (6)x1 から再び速さが0となった位置に移動する間で, 物体の速さが最大となるときの位置 を求めよ。 (7) 物体の速さが再び0となった位置 x2 を x と x1 を用いて表せ。

回答募集中 回答数: 0
物理 高校生

250回目の最小値をとったときにHとBの距離はなぜLA+2ΔLになるのですか? 最小値が4Δlごとにあらわれるのが分かりません💦

<tttttt EXI 図2 一光線の空 リットが きいと 率力の れは子供 改 354 マイケルソン干渉計 Sを出た波長入の単色光が,Sから距離 Ls にある [兵庫県大 改] 347 図のように,光源 鏡 A LA 鏡B 半透鏡 H -22- ←Ls -LB- AL AL LD 検出器 D 半透鏡Hにより上方への反射光と右方への透過光 光源 S 2つに分けられる。 反射光は,Hから距離 LA に固 定された鏡Aで反射して同じ経路をもどり、一部が Hを透過してHから距離LD 離れた検出器Dに到達 する。一方, Sを出てHを右方へ透過した光は,鏡 Bで反射して同じ経路をもどり、一部がHで反射してDに到達する。 これら2つの光が 干渉する。 初めのHからBまでの距離はLB (LB> LA) で, Bは左右に動かすことができ る。Hの厚さは無視でき, 鏡および半透鏡において光の位相は変わらないものとする。 )Bを少しずつHに近づけるとDで検出される光の強さは単調に増加し, 4Lだけ動い たとき,最大となった。 逆に, Bを少しずつHから遠ざけると光の強さは単調に減少 し、初めの位置から4Lだけ動いたとき最小となった。 波長を4Lで表せ。 Bを初めの位置にもどし, 波長を入から少しずつ大きくしていく。 Dで検出される 光の強さは単調に増加し, +4のとき最大となった。 LB-LAを入と 4入で表せ。 (3) 次に, 光の波長を入にもどし, Bを初めの位置から動かして, Hからの距離がL』に 等しくなるまで少しずつ動かした。 この間のDで検出される光の強さを観測すると, 250 回最小値をとることがわかった。 このとき,(2)における入との比を求め [16 新潟大 改] よ。 ヒント 353(2)隣りあう2つのスリットを通る光の経路差= | (回折後の経路差)-(入射前の経路差)| 354 (3)250回目の最小値をとったときの,HとBの距離はLA +24Lであり、最小値は 44L ご とに現れる。

回答募集中 回答数: 0
英語 高校生

「勉強するための時間」と「勉強を学ぶために留学する」のtoとforのちがいがよく分かりません

英作文のときに一番失敗しやす る。 たとえば日本語では, 目的を表すときに 「英語を勉強するために留学する」 と 言い、原因を表すときも「大雪のために電車が止まる」と同じように言うが、英語 ではこの目的を表す「…ために」と原因を表す「~ために」の使い分けが必要だ。 さらに,目的を表す「…ために」に関して言えば、 Lesson 34 で学んだように 本来は to 不定詞や〈so that〉 構文で表さなければならないのに,受験生の中には for を使おうとする人がよく見受けられる。 worl いく 他方 (○)I don't have any time to study. (○) I don't have any time for studying. (○) He went to the U.S. to study math. ④ (x) He went to the U.S. for studying math. 8 (O ⑨ (△ 10 (C exil uoy ob た る。 ては うに od 確かに、1や②の文の 「勉強するための時間」 のように名詞を修飾する場合は、 形容詞用法の to不定詞 ( 1の文)を使っても、②のように for を使ってもどちら でもよい。しかし③の「数学を学ぶために留学する」 のように動詞を修飾する場合、 つまり目的を表すには、④のように for を使うのは間違いだ。 3 のように to 不定 詞を使うか または <so that〉 構文を使わなければならない。 こうしたときまで for を使うのは,単に日本語に惑わされているだけだと言わざるを得ない。 書 と

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0