学年

教科

質問の種類

地学 高校生

問3の⑵がなぜ4となるのかがわかりません。助けてください😭

に 地球が球形であることは、紀元前4世紀にはすでに知られていた。アリストテレスらは自然現象の観察によ って、(ア)地球が丸い証拠をいくつか示していた。 紀元前3世紀には、エラトステネスは地球を球形と考 えて,はじめてその大きさを求めた。具体的には、ほぼ南北に位置するエジプトのアレキサンドリアとシェネ で、夏至の日の正午に観測される太陽の(A)の差と,アレキサンドリア~シエネ間の(B)から 地球の全周の長さを計算した。 17 世紀には,地球の形は完全な球ではなく,楕円を一方の軸のまわりに回転したときにできる回転楕円体で あると考えられるようになった。 そして 18世紀には、フランスの測量隊が(ウ)高緯度地方と低緯度地方で、 緯度差 1° あたりの経線の長さを測量することによって、このことを確かめた。 (エ)回転楕円体の長軸の長さを a, 短軸の長さを b として,- a-b a で表される値を(C)という。 また,地球の大きさ・形に最も近い回転楕円体を(D)という。(D )はなめらかな表面の立体である が,実際の地球の表面にはさまざまな凹凸がある。 問1 文章中の下線部(ア)について述べた次の文abの正誤の組合せとして最も適当なものを,後の1~4 のうちから一つ選び, 番号で答えよ。 a 南北に離れた2地点では,同じ日時でも見える星が異なる。 b 日食のとき, 太陽は丸く欠けていく。 生こ a 1 正 b a 正 A 正 b 誤 3 誤 a b a b 正 4 誤 誤 問2 文章中の空欄 (A)~(D)に入れる適当な語を,それぞれ答えよ。 問3 次の(1)(2)の各問いに答えよ。 (1) 文章中の下線部 (イ) に関連して, 地球を球形と仮定し, 国土地理院発行の5万分の1の地形図をもとに地球の半径を 求めることを考える。 図1のように, 5 万分の1の地形図の 上端から下端までの長さを r [cm], 上端と下端の緯度の差を [°〕 とする。 ① 地図上の上端から下端までの距離は、 実際の距離では 何kmに相当するか。 r を用いて答えなさい。 なお,5万分の1の地形図上での 1 cm は,実際の 0.5 km に相当する。 ②地球全周の長さ L [km] を, r と 0 を用いた式で表せ。 上端 T[cm] 下端 図15万分の1の地形図 0 (°) (2) 文章中の下線部 (ウ)に関連して述べた次の文章中の空欄 (E) ( F )に入れる語句の組 合せとして最も適当なものを、後の1~4のうちから一つ選び、番号で答えよ。 北海道と沖縄の5万分の1の地形図を用いて, 地球を球形と仮定し, それぞれの地形図の緯度差 0 は等 しいものとして, それぞれの地形図から地球の半径を求めた。 すると, それぞれの地形図の緯度差 0 は等し いにもかかわらず, 北海道の地形図から求めた地球の半径の方が, 沖縄の地形図から求めた地球の半径より も(E)ことがわかった。 これは,地球が極半径よりも赤道半径の方が ( F ) 回転楕円体に近い形 をしているためである。 E F 1 短い 短い 3 長い 短い 文中の下()に由 24 E F 短い 長い 長い 長い

回答募集中 回答数: 0
英語 高校生

投げやりです。すいません。英語皆無なので代行してください。

【必答問題 5 日常使う物のデザインをする際には標準化 (standardization) という方法がある。 という内容に続く次の英文を読んで、あとの問いに答えよ。(配点44) If we examine the history of advances in all technological fields, we see that some improvements come naturally through the technology itself, while others come through standardization. The early history of the automobile is a good example. The first cars were very difficult to operate. They required strength and skill beyond the abilities of many. Some problems were solved through automation. Other aspects of cars and driving were standardized through the long process of international standards committees: . On which side of the road to drive (constant within countries) country, but variable across On which side f the car the driver sits (depends upon which side of the road the car is driven) -The (2) of essential components: steering wheel, brake, clutch, and accelerator (the same, whether on the left- or right-hand side of the car) Standardization is one type of cultural constraint. With standardization, once you have learned to drive one car, you feel confident that you can drive any car, anyplace in the world. Standardization provides a major breakthrough in usability. I have enough friends on national and international standards committees to realize that the process f determining an internationally accepted standard is laborious. Even when all members agree on the merits of standardization, the task of selecting standards becomes a long, political issue. A small company can standardize its products without too much difficulty, but it is much more difficult for an industrial, national, or international body to agree to standards. There even exists a standardized procedure for establishing national and international standards. organizations works on standards. First, a set of national and international Then when a new standard is proposed, it must work its way through each organization's approval process. Standards are usually the result of a *compromise among the various competing positions, which can often be an inferior compromise. Sometimes the answer is to agree on (4 ). Look at the existence I both metric and *English units; of left-hand- and 18 right-hand-drive automobiles. There are several international standards for the *voltages and *frequencies of electricity, and several different kinds of electrical plugs and sockets- which cannot interchanged. With all these difficulties and with the continual advances in technology, are standards really necessary? Yes, they are. Take the everyday, clock. It's standardized. Consider how much trouble you would have telling time with a backward clock, where the hands revolved "counterclockwise." A few such clocks exist, primarily as humorous conversation pieces. When a clock truly violates standards, such as (the one in Figure 1, it is difficult to determine what time is being displayed. Why? The logic behind the time display is identical to that of conventional clocks: there are only two differences - the hands move in the opposite direction (counterclockwise) and the location of "12," usually at the top, has been moved. This clock is just as logical as the standard one. It. bothers us because we have standardized on a different scheme, on the very definition of the term clockwise. Without such standardization, clock reading would be more difficult: you'd always have to figure out the "mapping. E) compromise *metric メートル法の *English units イギリスの計量法(ヤードボンド法) *frequencies of electricity 電気の周波数 voltages E *mapping 対応づけ (2つのものの間の関係を意味する専門用語) 問1 下線部(1)の内容を、 同じ段落の自動車の例に基づいて30字以内の日本語で答えよ。た だし、句読点も字数に数える。 問2 本文中の空所 (2) に入る語として最も適当なものを、次のア~エのうちから一つ 選び 記号で答えよ。 7 color イ location ウ price I sight (239) 問3 第2パラグラフ (Standardization is one type of ...) について 次の Question に対す る Answer となるように、空所に入れるのに最も適当なものを,次のア~エのうちから一 つ選び、 記号で答えよ。 Question: What is "a major breakthrough in usability" provided by standardization? Answer Because of standardization, you ( device of the same kind all over the world. 7 can apply what you have learned to イ can make cannot produce I cannot use what you have learned when using 問7 下線部(5)が表す図 (Figure 1)として最も適当なものを、次のア~エのうちから一つ選 び記号で答えよ。 11 12 1 12 ) any machine or 10 2 10% 9 3 1 5 6 問4 下線部(3)の示す内容を, 40字程度の日本語で答えよ。 ただし, 句読点も字数に数える。 ウ 11 6 1 問5 次の文を第3パラグラフ (Ihave enough friends...) に入れるとき,本文中の①~ のうちのどの位置に入れるのが最も適当か、 次のア~エのうちから一つ選び, 記号 で答えよ。 9 3 Each step is complex, for if there are three ways of doing something, then there are sure to be strong proponents of each of the three ways, plus people who will argue that it is too early to standardize. 70 問8 最終パラグラフ (With all these difficulties...) の内容をもとに, 次の Question に2 語程度の英語一文で答えよ。 Question: According to the writer, why is the standardization of the everyday clo necessary? イ 2 ウ H O 問6 本文中の空所 (4) に入れるのに最も適当なものを、次のア~エのうちから一つ選び 記号で答えよ。 7 a single standard 1 several different standards ウ the same standard I too few standards <<-20-> <-21->

回答募集中 回答数: 0
化学 高校生

どうして①〜⑥は交点の部分を考えているのですか??

化学 3 タンパク質を酵素で加水分解すると,種々のアミノ酸の混合物が得られる。こ れらのアミノ酸の分子は,同一の炭素原子にカルボキシ基とアミノ基が結合して HOOD = いる。これらは,タンパク質の構成成分であり,R-CH(NH2 ) COOHで表され, α-アミノ酸とよばれる。 タンパク質は α-アミノ酸がペプチド結合で多数連なっ HOOD たポリペプチドである。ペプチドのアミノ基が残った末端をN末端,カルボキ HOOD HO シ基が残った末端をC末端という。 HOOD-HO いま,アミノ酸7個からなる直鎖のヘプタペプチド X について,以下の実験 (ab) を行った。なお, ヘプタペプチド X を構成するアミノ酸はグリシン、ア ラニン、アスパラギン酸, リシンの4種類であることがわかっている。これらを 仮にA~Dとする。 実験a ペプチドのC末端側からアミノ酸を順次切り離していく酵素であるカ ルボキシペプチダーゼを使って, ヘプタペプチド Xのアミノ酸の配列順序 を決定する実験を行った。 1molのヘプタペプチドXをこの酵素で加水分 解し,切り離されたアミノ酸 A,B,C,D の物質量を反応時間ごとに追っ て測定すると,次のグラフに示す結果が得られた。 71 A:2mo/ B3nol C:lol Pilmal アミノ酸の物質量 2 アミノ酸C アミノ酸B アミノ酸A [mol] アミノ酸 D 0 反応時間 (VI) 実験 b得られたアミノ酸A~DをPHがおよそ6の緩衝液に入れ電気泳動を 行った。 ②

回答募集中 回答数: 0
数学 高校生

線を引いている①の式が分からないのと、右側にある丸の印を付けている30というのが分かりません、。なんでtan90度ではないんですか? 解説お願いします🙇‍♀️

226 基本 例 135 測量の問題 00000 | 目の高さが1.5mの人が,平地に立っている木の高さを知るために, 木の前方の |地点Aから測った木の頂点の仰角が30℃, A から木に向かって10m近づいた地 点Bから測った仰角が45°であった。 木の高さを求めよ。 指針 p.222 基本事項 2 基本 133 基本 ① 与えられた値を三角形の辺や角としてとらえて,まず図をかく。そして、 ② 求めるものを文字で表し, 方程式を作る。 特に、直角三角形では,三平方の定理や三角比の利用が有効。 ここでは,目の高さを除いた木の高さを求める方がらく。 基本 例題 1 右の図の△AF に垂線 ADI AD=DC, AI (1) 線分AD (2) sin 75°, fast 点Aから点Pを見るとき, AP と水平面とのなす角を, PがAを通る水平面より上にあるならば仰角といい 下にあるならば俯角という。 ぎょう A 仰角 俯角 三角比 特に, の比を (1)ㄥ 形 き CHART 30° 45° 60°の三角比 (2) -30° 三角定規を思い出す 2 45° √3 (1) △ 60 45% 解答 ZA △A 右の図のように, 木の頂点を D, 木の根元をCとし 解答 目の高さの直線上の点を A', B', C' とする。 h=(10+x)tan 30° このとき, BC=x (m), C'D=h(m) とすると ① h=xtan45 A' 30° B45° ②から 1.5ml x=h これを①に代入して A 10m B xm 10+h h= ゆえに √3 (√3-1)h=10 ①,②はそれぞれ 10 よって h=- √√3-1 10(√3+1) (√3-1) (√3+1) 10(√3+1) tan 45°= =5 (√3+1) 2 したがって、求める木の高さは、目の高さを加えて 5(√3+1)+1.5=5√3+6.5(m)(*) 注意 この例題のような, 測量の問題では, 「小数第2位 を四捨五入せよ」などの指示がある場合は近似値を求 め、指示がない場合は計算の結果を、 そのまま (つま 上の例題では根号がついたまま) 答えとする。 tan 30°= /30° 45% 60°の三角比の 値は覚えておくこと。 (*) 31.73から 5√3=8.65 よって、538.7 とすると 5√3+6.58.7+6.5 =15.2(m) √3 tan 30% h h から ここで x tan45°=1 10+x’ 練習 海面のある場所から崖の上に立つ高さ30mの灯台の先端の仰角がG 135 よ よく L. △ か <カ (2) 練習 ③ 136

回答募集中 回答数: 0