学年

教科

質問の種類

数学 高校生

下線部において、dが省略される式はどのように出したのか過程を教えてください!! 分かる方ぜひぜひお願いします🙇‍♀️

372 要 例題 14 等差数列と等比数列の共通項 初項1の等差数列{an} と初項1の等比数列{bn} が a3=bs, a=ba, を満たすとき αz, b2 の値を求めよ。 CHART & SOLUTION 等差数列と等比数列の共通項 00000 ash [神戸薬大] 基本 1.9 条件から、初項、公差 d, 公比rの関係式を導く 数列 {an}, {bm} ともに初項は与えられているから, {an} の公差d,{6}の公比rの関係式 を導く。導いた関係式にはやが含まれるからを消去するのは困難である。まずは dを消去してrを求めよう。 解答 10.1X001136 数列{a} の公差をd, 数列 {bn} の公比をとすると an=1+(n-1)d, bn=1.yn-1 ・① ag=bg から 1+2d=2 a4=64 から 1+3d=3 ③ ② ③ から 3(2-1)=2(z3-1) よって 23-3r2+1=0 ゆえに (r-1)(2r2-r-1)=0 よって (n-1)2(2x+1)=0 したがって 1 r=1, 2 末 [1] r=1のとき ② から d=0 5000+ このとき, ①から α5=1,65=1 x10.J これは, α5≠bsを満たさないから、不適。 [2]=-1/2 のとき ② から d=- 3 ・円 8 このとき, ①から (円) 3 as=1+(5-1)(-1/2)=-1/2,65 -(-1)-16 = 2' 2 これは, as≠bs を満たしている。 [1], [2] から, 求める as, by の値は42=2, b2= 62 1 8' 2 x engl dを消去する方針。 ②からd=3 ( ③から6d=2 ← 22-r-1 =(r-1)(2r+1) すべてのに対し an=1,6=1 ←an=1+(n-1)(

解決済み 回答数: 1
英語 高校生

この英語長文において、印刷技術の発達に必要な技術はどのようなものであるか50~200字で答えてください

木版画 鋳造 第3問 以下の文は、 S. Strandh の “Machines, an illustrated history" からの抜粋で ある。 次の文を読んで、設問に解答せよ。 (ア) The tools of precision mechanics were, without doubt, the technical pre conditions for making wood cuts and for the development of printing. The oldest dated wood engraving is from 1418. It shows fine lines throughout 細部 and a richness of detal, which imply that the tools used, the knives, burins, and so on, must have been eminently suitable At this time, it was only the precision mechanics of clock making which could achieve the technique required for such tools. 精密機械技術 (イ) A (woodcut was produced by transferring a drawing, reversed from left to right, onto a carefully surface-ground "block" of wood, after which the surface wood on either side of each line in the drawing was cut away with a burin of forged steel. The remaining wood on all 'surfaces which were to be white in the drawing were then cut away with gravers and gouges, so that the lines of the drawing became raised. They were then inked and pressed against paper. これは 理由では ないから、 (~のときに、何 が原因か は不明) The woodcut method spread rapidly in the late Middle Ages when pictures were rarity. At first, skilful craftsmen made the woodcuts, but before long, eminent artists were themselves cutting their own drawings in wood. One of the first was the German Albrecht Duerer (1479-1528) who, in 1498, published the famous pictorial series of the Revelation of St. John. Graphics had become an independent art form-based on the progress of precision 酒の mechanics! 可動式の The 1440s saw the first book printed with movable die-cast type. (The letter press printing method used by Johann Gutenberg (1399?-1468) was basically the same as the one used for printing woodcuts, but Gutenberg used cast, movable type instead of cut blocks. The production of dies for the type was made possible by the tools of precision mechanics, too. It does not detract from Gutenberg's contribution that printing with movable type has been practised in the Far East, or more specifically Korea, two thousand years prior to this. Several of the techniques described here, which developed so quickly during the technical revolution of the Renaissance, had had predecessors in other parts of the world. ' 金楼 にねじ を刻む 道具 ~をなら K あったもの

未解決 回答数: 0